Operations
Opening and Closing the Disc Tray
•Turn the unit power on. Press the OPEN/CLOSE button to open the disc tray. OPEN/CLOSE buttons are pro- vided on both the main unit and control unit.
•The disc tray cannot be opened during playback in order to prevent playback from being interrupted if the OPEN/CLOSE button is pressed accidentally. Stop the playback first, then press the OPEN/CLOSE button.
Loading discs
•Hold the disc by the edges and place it in the disc tray, then press the OPEN/CLOSE button again to close the disc tray. The unit will show the total track number and the total playing time for about 2 seconds then enter the cue condition. The cue point will be set to the music starting point of the first track automatically.
CAUTION: Do not place any foreign objects in the disc tray, and do not place more than one disc in the disc tray at a time.Do not push the disc tray in manually when the power is off, as this may result in malfunc- tion and damage to the player.
Selecting Tracks
•Press the SKIP button once to move to next higher or lower track.
•Hold the SKIP button to change tracks continuously at a higher speed.
•When a new track is selected during playback, play- back begins as soon as the skip operation is completed.
•If the skip forward button is pressed while at the last track, the first track is selected. In the same way, if the skip backwards button is pressed while at the first track, the last track is selected.
Starting Playback
•Press the PLAY/PAUSE button dur- ing the pause or cue condition to start playback, the PLAY indicator
lights up.
• The point at which playback starts is automatically stored in the memory
as the cue point. The disc then
returns to the cue point when the CUE button is pressed. (Back Cue)
Stopping Playback
There are two ways to stop playback:
•Press the PLAY/PAUSE button during playback to pause at that point.
•Press the CUE button during playback to return to the cue point. This will cause the music to pause.
Pausing
•Press the PLAY/PAUSE button to switch between play and pause.
Cueing
“Cueing” is the action of preparing for playback.
• Press CUE button, the player will |
|
enter cue mode, the playback | CUE |
returns to cue point and pauses, | |
the cue indicator lights up and the |
|
play indicator flashes. When PLAY/ |
|
PAUSE button is pressed, play |
|
starts from the cue point. |
|
•When the track search operation is completed after pressing the SKIP buttons, the player automatically finds the position at which the sound starts and will cue at that position(Auto Cue).
•If the CUE button is pressed after the search operation or the scanning operation, the playback returns to cue point and enters and becomes paused.
•Cue point setting: When play starts from pause or skip to a new track by using skip button, the begin play point will be set to the new cue point. When a new cue point is set, the cue indicator lights by flashing for about 1 second.
NOTE: During cue mode, if the CUE button is pressed and held, playback will start from the cue point. When the button is released, the player will return to the cue mode automatically, it allows you to check the cue point.
11