___________________________ Note ____________________________
•These are device dependent X server options and not available for ALL graphics options. Please refer to Table
•Both the Width and Height should be specified in the
•The [screen] number need not be specified if only one screen exists or if the user wants all screens to use the same values. The [screen] value is generally '0' as shown in the example below.
Example:
^
_ [screen] value
•Anything added after the
____________________________________________________________
4.Restart the GUI using the appropriate method. For DIGITAL UNIX V4.* systems use:
#/sbin/init.d/xlogin stop
#/sbin/init.d/xlogin start
How to Change the Resolution and Refresh Rate on CDE GUI
1.Log in to the system as "root".
2.Check to see if the directory /etc/dt/config exists. If not, create it as follows: Example:
#mkdir /etc/dt/config
#chmod 755 /etc/dt/config
3.Copy the Xservers file from the path /usr/dt/config to the path
/etc/dt/config. Example: