Compaq VX1 manual Chapter Overview, Introduction, Module Description

Chapter 1

Overview

1.1Introduction

This chapter provides a brief overview of the 3Dlabs OXYGEN VX1 PCI graphics controller.

1.2Module Description

The 3Dlabs OXYGEN VX1 PCI graphics controller accelerator module is a single expansion-slot, 32-bit PCI bus graphics option that provides 2D graphics acceleration for supported Compaq systems. It is based on 3Dlabs’ GLINT P3 graphics chip.

Table 1–1 3Dlabs OXYGEN VX1 PCI Graphics Controller

Option	Description
SN-PBXGF-AB	3Dlabs OXYGEN VX1 PCI graphics controller with 32 MB of SDRAM
	memory

For up to date minimum operating system and firmware revision information supported for the 3Dlabs OXYGEN VX1 PCI graphics controller, refer to the system QuickSpecs located at http://www.compaq.com.

Overview 1-1