Compaq PL-P3/SMP, JP2, JP1 manual Removing the original processors from the CPU slots

Installation Guide

www.powerleap.com • www.friendtech.com

Installation

Installing the PL-P3/SMP™ is quick and easy: First, remove the original processors from the motherboard’s processor slots. Next, insert a processor into the PL-P3/SMP™, apply thermal compound to the processor, and install the heatsink/fan. Finally, install the PL-P3/SMP™ into the motherboard’s processor slot and make power connections.

Removing the original processors from the CPU slots

The original Slot 1 processors. Be sure to disconnect the system power before continuing with your processor upgrade.

After removing one of the original processors (for details, refer to your motherboard manual).

After removing both original processors. We recommend using a small brush to remove any dust from the slots.

Inserting a processor, applying thermal compound, and installing the heatsink/fan

Before installing the processor in the PL-P3/SMP.

Installing the processor in the PL-P3/SMP. (1)

Installing the processor in the PL-P3/SMP. (2)

The PL-P3/SMP with installed	Applying thermal compound to the
processor.	processor.

The processor after applying thermal compound.

-2-