Compaq JP2, JP1 manual Installing the PL-P3/SMP and connecting to a power supply

Installation Guide

www.powerleap.com • www.friendtech.com

The heatsink with protective membrane. Peeling off the protective membrane.

Installing the heatsink/fan onto the processor.

Attaching the heatsink/fan's retaining	Attaching the heatsink/fan's retaining	Connecting the fan's power cable to the
clip to the ZIF socket. (1)	clip to the ZIF socket. (2)	PL-P3/SMP.

Installing the PL-P3/SMP™ and connecting to a power supply

For most systems, you can connect the provided power cable directly from the PL-P3/SMP to an unused 4-pin connector from the power supply.

Connecting the PL-P3/SMP™ power cable to an unused connector from the power supply:

After removing the original CPUs.

Connecting the 3-pin end of the PL-P3/SMP’s power cable to the PW1 connector on the PL-P3/SMP.

Inserting the first PL-P3/SMP into the processor slot.

-3-