5 Installation (Continued)
3
Attach Mounting Bracket Using ‘L’ Shaped Anchors - New Concrete
1” EXPOSED
6”
1. Pour concrete at least 6 inches deep.
2.Insert anchors into curing concrete. Leave at least 1 inch exposed.
3.Once concrete has cured attach anchor and tighten nuts onto mounting bracket.
4
Attach Post to Mounting Bracket
1. Align post to mounting bracket and attach post to mounting bracket with four post mounting screws.
5 | Install Pushplate |
|
|
| PUSHPLATE INSTALLATION | DUAL PUSHPLATE INSTALLATION | PANTHER PUSHPLATE INSTALLATION |
1. Thread the pushplate screws into the mounting box leaving a majority of the screw exposed. Attach the pushplate to the mounting screws, | |||
then use the hex key provided to fully tighten the screws. Refer to the appropriate Pushplate User’s Guide for detailed installation and setup | |||
instructions. |
|
| |
75.0131.05 | 20080606 |
| Page 3 of 4 |
