Compaq SMX945 user manual Bios Setup, Boot Up the Operating System and Install the Drivers

Page 20

DIGITAL-LOGIC AG

SMX945 Condensed Manual V1.0A

4.1.BIOS Setup

Since the BIOS is auto-configuring during the start-up procedure, normally the user does not enter the BIOS setup. Manual setup is needed only to change the default settings. Please refer to the driver/software/BIOS manual “SMX945_BIOS” printed from the CD for the BIOS setup details.

4.2.Boot Up the Operating System and Install the Drivers

Depending on which boot drive is available, boot up the operating system from the CompactFlash, hard disk, or floppy disk.

To install the drivers, see the driver/software/BIOS manual “SMX945_BIOS” on the Product CD.

Image 20

Contents SmartModule Express SMX945 SMX945 Condensed Manual V1.0A Initial VersionTable of Contents Preface TrademarksDisclaimer Environmental Protection StatementTechnical Support Limited Two Year WarrantyRecycling Information Explanation of Symbols CE ConformityApplicable Documents and Standards For Your Safety RoHS CommitmentRoHS Compatible Product Design Overview Standard FeaturesUnique Features Block Diagram Specifications SpecificationIntel 945GME Graphics Memory Controller Hub Specification Mathematics CoprocessorIntel 945GME Graphics PEG PEG ControllerSpecification Intel 82801DBM ICH7DH SpecificationReset & Power Management Specification Power Supply SpecificationOperating Environment Specification EMI / EMC IEC1131-2 refer MIL 461/462 SpecificationProduct Name Part Number Description Examples of Ordering CodesRelated Application Notes Preparation Print Detailed Manuals from the CDPart Nr Connect Peripherals to the BoardDevelopment Kit, Part Nr Start UP / Power OFF the Board How to Activate PWRBTN#DIGITAL-LOGIC AG Bios Setup Boot Up the Operating System and Install the DriversIndex