Compaq EK-ASIP2-OG. D01 manual System Features, User Interfaces, Alarm Subsystem, Maintainability

Page 14

Product Overview

1.3 System Features

This section provides a brief description of the system features of the AlphaServer IP Platform.

1.3.1 User Interfaces

The AlphaServer IP Platform is designed to work in real-time public networks of telecommunications service providers. System and network management activities are performed by means of a separate data communications network rather than the telephony communications network (for example, voice or signaling). Both graphical user interfaces (GUIs) and character cell displays are supported, depending on the interfaces provided by the layered products on the IP Platform.

Command line or character cell displays are used for objects that do not have a GUI, or as a supplement to those with a GUI. Command line interfaces can be run over a low-speed dial- up modem with minimal communication protocol support.

1.3.2 Alarm Subsystem

The alarm subsystem of the AlphaServer IP Platform provides alarming functions to the platform. These functions include the following:

Visual indication of an alarmed event

Audible indication of an alarmed event

Programmable external event notification

Diagnostic capability

Battery-backup for alarm indicators

Programmable software interface with interrupt capability

Dry contacts for remote monitoring of alarms

The alarm subsystem is comprised of two physical modules: an alarm control module that resides on the PCI bus, and an alarm indicator panel, which contains all of the visual and audible indicators.

1.3.3 Maintainability

All configurations are designed with front access for all user devices contained in the AlphaServer 1000A system, the ISA bus expansion chassis, and the modular storage shelf BA35x-Sx subsystem. All nonuser devices have rear access.

The AlphaServer 1000A system and the ISA bus expansion chassis are slide mounted for ease of maintenance.

The BA35x-Sx application storage disks are hot-swappable.

1.3.4 Reliability

Each Compaq Computer Corporation component of this system will function reliably over time as long as the hardware options used are not altered. All of the Compaq options used in the design of this system meet Compaq Computer Corporation standards for reliability. However, the reliability of the equipment supplied by other vendors is determined by the manufacturer of each device.

1–4AlphaServer Intelligent Peripheral Platform Hardware Owner's Guide

Image 14
Contents May Compaq Computer Corporation Houston, Texas May Acoustics Page Table of Contents AlphaServer IP Platform Specifications Reconfiguring the AlphaServer IP PlatformSystem Troubleshooting Basic OperationAlphaServer IP Platform Duplex System Diagrams Alarm Input WiringField Wiring the -48 Vdc Power Inverter AlphaServer IP Platform Simplex System DiagramsViii Intended Audience PrefaceAbout This Guide Structure of This DocumentConvention Meaning ConventionsRelated Documentation IP Platform Overview Product OverviewIntroduction IP Simplex System IP Duplex SystemFactory Installed Software User Interfaces System FeaturesAlarm Subsystem MaintainabilityCompaq Computer Corporation and Industry Standards Safety and Electromagnetic CompatibilityUpgrading Telecommunications InterfacesSystem Security AlphaServer 1000A SystemRequired and Optional Hardware OverviewAlphaServer 1000A Required Hardware Part Number Description Simplex DuplexModular Storage Shelf Optional Hardware Modular Storage Shelf Subsystem BA35x-SxISA Bus Expansion Chassis Modular Storage Shelf BA35x-Sx Optional HardwareISA Bus Expansion Chassis Required and Optional Hardware Part Number Description Simplex DuplexIP Power Controller Options IP Power Controller SubsystemAlarm Indicator Panel Alarm Indicator Panel OptionsExternal Hardware Options External Hardware OptionsPage Installing the AlphaServer IP Platform Hardware Factory Installed HardwareAchtung Preinstallation ConsiderationsSite Preparation Hardware Installation VorsichtInstalling the IP Platform Connecting the Network HardwareT-1 to D/240SC-T1 Pin Designations Connecting Dialogic D/240SC-T1 and DTI/211 T-1 ModulesSignal Pins T1 to DTI/211 Pin DesignationsSignal Jack/Pin Connecting Dialogic DTI/212 E-1 Modules 75-OhmConnecting Dialogic DTI/212 E-1 Modules 120-Ohm E-1 to DTI/212 75-Ohm Pin DesignationsConnecting Dialogic LSI/120 Loop-Start Module LSI/120 Loop-Start 25-Pin DesignationsLSI/120 Loop-Start 50-Pin Designations IP Power ControllerUser Alarms Locking Your System Page Step III AlphaServer 1000A System Turning on the AlphaServer IP PlatformStep I Power Controller Circuit Breakers Basic OperationVisual Indicators Basic Operation of the IP Platform Subsystem ComponentsAlarm Indicator Panel Front and Rear View Audible Indicator Replacing Batteries in the Alarm Indicator PanelDry Contacts Dry Contact Relay Functional Specification Power Condition Relay State Critical Major MinorModular Storage Shelf BA35x-Sx Subsystem Voltage Amps Reconfiguring the AlphaServer IP Platform Command Description AlphaServer 1000A System ConfigurationsSRM Console Configuration Commands ISA Bus Expansion Chassis Configuration Removing and Replacing the Alarm Sensor ModuleModular Storage Shelf BA35x-Sx Subsystem Configuration Removing and Replacing the AT Bus Expansion KitAlarm Indicator Panel Configuration Removing and Replacing the Alarm Indicator ModulePage System Troubleshooting AlphaServer 1000A Subsystem Alarm Indicator PanelModular Storage Shelf BA35x-Sx Subsystem AlphaServer IP Power ControllersISA Bus Expansion Chassis Page Electrical Specifications AlphaServer IP Platform SpecificationsPhysical Dimensions Table A-1 Physical DimensionsOperating/Storage Conditions System Environmental SpecificationsTable A-3 Environmental Specifications Nonoperating ConditionsInput Specifications Dry Contact SpecificationsTable A-4 Dry Contact Specifications Output SpecificationsCentral Office Compatibility Alarm Input Wiring Alarm Input Wiring DiagramPin No Signal Wiring User Alarm InputsTable B-1 Alarm Control M odule 8-Pin MJ Connector Pinout Field Wiring the -48 Vdc Power Inverter Field Wiring the -48 Vdc Power ControllersTable C-1 Field Wir ing Recommendations for Each Power Feed Installing Suitable Field WiringField Wiring Recommendations Installing the WiringAlphaServer IP Platform Duplex System Diagrams AlphaServer IP Platform Duplex AC System Figure D-1 IP Platform D uplex AC System Front and Side ViewFigure D-2 IP Platform D uplex AC System Rear View AlphaServer IP Platform Duplex DC System Figure D-3 IP Platform D uplex DC System Front and Side ViewFigure D-4 IP Platform D uplex DC System Rear View Page AlphaServer IP Platform Simplex System Diagrams AlphaServer IP Platform Simplex AC System Figure E-1 IP Platform Simplex AC System Front and Side ViewFigure E-2 IP Platform Simplex AC System Rear View AlphaServer IP Platform Simplex DC System Figure E-3 IP Platform Simplex DC System Front and Side ViewFigure E-4 IP Platform Simplex DC System Rear View Page Glossary Diagnostic program Command line interfaceConsole mode BusEnvironment variables Eisa Configuration Utility ECUEisa bus EthernetLight-emitting diode LED MAC media access control addressMaintenance Operations Protocol MOP session Mass storage deviceRepeater RedundantReliability ServerSystem disk ThinWireStorageWorks TelnetIndex Index

EK-ASIP2-OG. D01 specifications

The Compaq EK-ASIP2-OG. D01 is a significant product in the landscape of enterprise computing, featuring a range of capabilities that cater directly to the needs of businesses seeking high-performance solutions. This hardware is designed for a range of applications, offering a solid balance between efficiency and power, making it suitable for varying workloads.

One of the key features of the EK-ASIP2-OG. D01 is its robust processing architecture. It is equipped with advanced microprocessor technology that ensures high-speed data processing and multitasking capabilities. This feature is particularly valuable in environments that require the simultaneous execution of multiple applications, thereby enhancing productivity and operational efficiency.

In addition to processing power, the EK-ASIP2-OG. D01 integrates significant memory capacity. This ensures that large applications can run smoothly without performance bottlenecks. The system supports scalable memory configurations, allowing users to optimize their setup according to their specific needs. This flexibility is essential for organizations that anticipate growth or require variable resource allocation.

Networking capabilities are another standout aspect of the EK-ASIP2-OG. D01. It comes with advanced network interfaces that promote seamless connectivity and high-speed data transfer. This is crucial for enterprise environments where data needs to be shared across various departments or locations in real time. The integration of leading networking technologies ensures reliable communication and collaboration, which are vital for modern business operations.

Furthermore, the EK-ASIP2-OG. D01 is designed with advanced security features, addressing the growing concerns around data protection. These features include encryption capabilities and secure access controls, ensuring that sensitive information remains safeguarded against potential threats. This focus on security makes it an ideal choice for businesses that prioritize safeguarding their data.

In terms of energy efficiency, the EK-ASIP2-OG. D01 employs power management technologies that reduce energy consumption without compromising performance. This not only contributes to cost savings for organizations but also aligns with sustainability goals, a factor increasingly important to businesses globally.

In conclusion, the Compaq EK-ASIP2-OG. D01 is a powerful and versatile server solution, equipped with cutting-edge technologies, robust security features, and sustainable energy practices. It is designed to meet the demands of modern enterprises, making it a reliable choice for businesses looking to enhance their computing capabilities and overall operational efficiency.