Installation Notes, Safety Instructions | Cisco Systems 78-13212-01

Mounting Instructions for the Cisco Aironet 6.5 dBi Diversity Patch Wall Mount Antenna

Installation Notes

•The density of the materials used in a building’s construction determines the number of walls the signal must pass through and still maintain adequate coverage. Consider the following before choosing the location to install your antenna:

–Paper and vinyl walls have very little affect on signal penetration.

–Solid and pre-cast concrete walls limit signal penetration to one or two walls without degrading coverage.

–Concrete and wood block walls limit signal penetration to three or four walls.

–A signal can penetrate five or six walls constructed of drywall or wood.

–A thick metal wall causes signals to reflect off, causing poor penetration.

–A chain link fence or wire mesh spaced between 1 and 1 1/2 in. (2.5 and 3.8 cm) acts as a harmonic reflector that blocks a 2.4-Ghz radio signal.

•Install the antenna away from microwave ovens and 2-GHz cordless phones. These products can cause signal interference because they operate in the same frequency range as the device your antenna is connected to.

•Install the antenna in a vertical orientation to maximize signal propagation.

Installation Notes

You can mount the antenna using the mounting kit provided. The kit contains the following parts:

•Four #8 plastic wall anchors

•Four #8 x 3/4 in (1.9 cm) Philips™ type A pan head screws

Tools and Equipment Required

To install the antenna, you will need the following tools and equipment.

•A Philips™ screwdriver

•A portable hand or electric drill

•A 3/16 in (4.7 mm) drill bit

•A carpenter’s hammer

•A pencil

Safety Instructions

Follow these safety precautions when installing your antenna.

•Plan your installation procedure carefully and completely before you begin.

•If you are installing an antenna for the first time, for your own safety as well as others, seek professional assistance. Consult your dealer, who can explain which mounting method to use for the location where you intend to install the antenna.

•Select your installation site with safety, as well as performance, in mind. Remember that electric power lines and telephone lines look alike. For your safety, assume that any line is an electric power line until determined otherwise.

Mounting Instructions for the Cisco Aironet 6.5 dBi Diversity Patch Wall Mount Antenna

2	78-13212-01

78-13212-01 specifications

Cisco Systems 78-13212-01 is a robust and versatile networking product designed to enhance connectivity and productivity in various environments, including enterprises, data centers, and cloud infrastructures. This specific model is part of Cisco's extensive portfolio that focuses on providing high-performance networking solutions to meet the demands of modern-day communications.

One of the main features of the Cisco 78-13212-01 is its support for advanced routing and switching capabilities. This device is engineered to manage substantial amounts of data efficiently while maintaining low latency, making it ideal for environments that require quick data exchanges and high availability. With its scalability, organizations can expand their network without the need for complete system overhauls, thus supporting future growth without additional investment in new hardware.

The Cisco 78-13212-01 integrates with various networking technologies, including Cisco's proprietary software and firmware that enhance its functionality. Technologies such as Cisco IOS and other networking essentials allow for advanced configurations that ensure reliable operation and security. This assimilation makes it easier for network administrators to manage traffic prioritization, optimize bandwidth usage, and implement complex routing scenarios.

Security is another critical characteristic of the Cisco 78-13212-01. The device comes equipped with features that safeguard the network against potential threats and vulnerabilities. With capabilities such as firewalls, intrusion detection systems, and support for VPN configurations, it offers a multi-layered security approach that protects sensitive data as it traverses the network.

Additionally, the Cisco 78-13212-01 supports various connectivity options, enabling compatibility with different networking standards. This flexibility ensures that organizations can integrate it into diverse existing architectures with minimal disruption. The product’s user-friendly interface simplifies management tasks and monitoring, allowing IT teams to keep a close eye on network performance and health.

Furthermore, the deployment of Cisco 78-13212-01 aligns with modern trends toward network virtualization and automation. It supports the implementation of software-defined networking (SDN) principles, allowing for more flexible and programmable networking environments.

In summary, the Cisco Systems 78-13212-01 stands out with its powerful routing and switching capabilities, advanced security features, scalability, and compatibility with modern networking technologies. It is a critical tool for businesses looking to enhance their networking infrastructure in a rapidly evolving technological landscape.