Peerless Industries EXB-S, EXC-S, EXB-W, EXA-W manual Adjusting Mount Extension, Install Cable Covers

Adjusting Mount Extension

7	While supporting the weight of the projector, loosen clamp plate screws half a turn and position projector to the
	desired extended position. Retighten clamp plate screws securely.

WARNING

•On ceiling installations, clamp plate adjustment screws support weight of projector when fully tightened. Weight of the projector will need to be supported if clamp plate screws are loosened.

CEILING INSTALLATION

CLAMP PLATE

SCREWS

D

WALL INSTALLATION

(EXCEPT FOR EXC MODELS)	CLAMP PLATE
	SCREWS

D

Install Cable Covers

8	Cut cable covers (Q) to the length of inner channel (C) and outer channel (B) openings, leaving space for cables if
	routed through channels. Snap cable covers (Q) into openings as shown.

CEILING INSTALLATION			WALL INSTALLATION		Q
			(EXCEPT FOR EXC MODELS)
					CUT TO
					LENGTH OF
					OPENING
		Q		C	B
Q	B	CUT TO
		LENGTH OF			Q
CUT TO		OPENING
LENGTH OF
OPENING	C				CUT TO
					LENGTH OF
					OPENING
		CABLES			CABLES
			10 of 11	ISSUED: 1-11-08 SHEET #: 055-9495-2		10-16-08
Visit the Peerless Web Site at www.peerlessmounts.com				For customer care call 1-800-865-2112 or 708-865-8870.