Fusion INTELPage IP 5, 2.1 manual Protocol/RS232

Page 17

Manual

Fusion Intelpage IP

Protocol/RS232

From the Main Menu, select [4] to enter the protocol and rs232 setup screen.

•Ethernet Protocol Use - The protocol that the Ethernet port (RJ45) will use. The options available are COMP1, COMP2, SCOPE, TAP, TNPP Duplex, TNPP Simplex, Terminal, Tekk and SMTP. All the protocols will use TCP port 6000 (this port is adjustable within the HTML interface) with the exception of SMTP which uses port 25.

•Serial Port Protocol Use - The protocol that the RS232 port will use. Options are the same as TCP only that SMTP is not available. (default TAP)

™NOTE: The password in the TAP protocol is ignored.

™NOTE: Pager 0 must be configured for COMP1.

™NOTE: The TNPP device address is 1234. TNPP received address is ignored. ALL messages are accepted.

ÆIMPORTANT: If you are sending to a combination of numeric, alpha and tone pagers, you will need to use TNPP or SCOPE.

•Max Message Count - This refers to the maximum number of messages that can be sent by a protocol in a single session/connection. A value of ‘0’ means no maximum limit. (default 0)

•Lookup PagerID - If checked, the system will look up Pager ID’s in the pager database. Otherwise the system will use the cap code supplied in the message.

•Never Disconnect - If checked, the Intelpage IP 5 will never disconnect itself. It will only disconnect when the system Intelpage IP 5 is connected to does. (default OFF)

•TAP Disable ID= Every 2 Seconds- If left unchecked and the TAP protocol is being used, a carriage return resulting in an “ID=” will be issued every 2 seconds. (default OFF)

•Baud - The transmission speed of the RS232 port on the Intelpage IP 5. (default 9600)

•Data bits - The number of bits that actually contain information pertaining to the message rather than to the transmission (e.g. stop bits). (default 8)

•Parity - A method of verifying the accuracy of the data sent. In this case it is either none (not used), odd or even. (default NONE)

•Stop bits - The number of bits sent at the end of each byte and is used for synchronization purposes. In this case it is either 1 or 2. (default 1)

•Flow Control - This refers to the “flow control” property of the connection.

ÆIMPORTANT: Baud, data bits, parity and stop bits must all match that of the system’s port that the Intelpage IP 5 is connected to on the other end.

•Enter License Key - Some of the features on the INTELPage are licensable. This means they can be enabled or disabled by applying for a new license key from you place of purchase. By default, the HTML and Terminal interfaces are turned on but all other options are disabled. The available license options are RS232 protocols, Ethernet protocols, STMP protocol, TNPP protocol, WWW Manual Paging

© CommtechWireless

Page 17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents INTELPage IP Software License Statement CommtechWireless Safety and General Information Table of Contents Conventions About This HandbookSimultaneous Ethernet and Serial Support IntroductionPager database Intelpage IP 5 Kit Ethernet Indicators IP Act LED Green Front Panel LED IndicatorsRear Panel ConnectorsAntenna Port DC InputAntenna Enclosure MountingConfiguring through a Terminal Program Software ConfigurationCommtechWireless CommtechWireless Pager Database Editing User Interface Fields Manual PagingNetwork Settings Protocol/RS232 CommtechWireless Pocsag Password IP Access List Site Survey Status Transmitter Run Dhcp manager under Start Programs Administrator Tools Configuring through TCP/IPConfiguring through TCP/IP Example CommtechWireless Using IPDiscover Home User Interface FieldsSend a Message Pagers Network Settings Serial Port Settings Transmitter Settings Protocol CommtechWireless Pocsag Password IP Access List Survey Status Licensing Ethernet Connection Binary and MaskingCommunications Serial Connection Updating Firmware AT&F Setting up Dial-in TAP to Intelpage IP 5 from BASEPageSetting up Email Paging Forward Email From/Subject/Body Multi-User Smtp Testing SmtpVswr Installation of Multiple Transmitters and AerialsTransmitters Mopole Commtech ’s MO-GIA-VHF or MO-GIA-UHF Types of AntennasCo-linear Commtech ’s CL-A-VHF and CL-A-UHF This Product is Not Field Serviceable Technical SpecificationsFurther Help and Support Contact your Place of Purchase

INTELPage IP 5, 2.1 specifications

Fusion 2.1 is a powerful platform aimed at enhancing the capabilities of integrated systems, particularly within the context of embedded applications. Developed by Intel, it successfully bridges the gap between hardware and software, creating a seamless experience for developers and users alike. One of the defining aspects of Fusion 2.1 is its robust architecture, which allows for efficient processing and management of resources, tailored specifically for resource-constrained environments.

Among its main features, Fusion 2.1 boasts an advanced virtual machine interface, enabling developers to create and manage multiple virtual machines efficiently. This feature not only optimizes resource allocation but also enhances system performance by running different applications in isolated environments. The platform supports a variety of programming languages, making it versatile and adaptable to various development needs.

Fusion 2.1 also emphasizes connectivity, featuring advanced communication protocols that streamline data exchange between devices and systems. This capability is crucial for the Internet of Things (IoT) and other networked applications where seamless integration is essential. Security is a cornerstone of Fusion 2.1, with built-in encryption and authentication mechanisms to safeguard sensitive data and ensure compliance with industry standards.

When discussing technologies, Fusion 2.1 incorporates several cutting-edge advancements, such as support for machine learning and artificial intelligence. These technologies enable developers to build intelligent applications that can learn and adapt based on user interactions and environmental stimuli. Additionally, the platform offers extensive support for heterogeneous computing, allowing for the combination of different processor types to optimize performance for specific tasks.

The characteristics of Fusion 2.1 make it an ideal choice for industries such as automotive, healthcare, and industrial automation. Its reliability and scalability ensure that as system demands grow, Fusion 2.1 can adapt without compromising performance. Furthermore, the platform is designed to facilitate rapid development cycles, which is essential in today’s fast-paced technological landscape.

In summary, Fusion 2.1 by Intel represents a significant step forward in the domain of integrated systems, offering a comprehensive solution that combines efficient resource management, robust security, and advanced technologies. Its features are tailored for developers, ensuring that they can create optimized applications for a wide range of industries, paving the way for future innovations in embedded systems.
Top Page Image Contents