4 Configuring Server Application Resources
Several server resources apply to the individual applications that run on the terminal. These resources are not needed for basic functioning of the terminal, but individual applications require them. The resources in this category use the following network protocols:
HTTPPOP3/IMAP4
ICARSH
This chapter provides a brief description of where each protocol is used and any special configuration requirements. Some resources covered here (such as HTTP) have already been described in previous chapters.
Refer to Chapter 5 for further information about browser resources.
HTTP
HTTP is the protocol used by the World Wide Web. If you are going to be using the browser to access pages within your intranet, you will need to configure your intranet web servers. HTTP configuration is based upon the HTTP server software used, so refer to the installation documents that come with the HTTP software you are installing.
If you are not using a browser and are not accessing any pages local to the intranet (including T1500 Help), you do not need to configure an HTTP server.