Christie Digital Systems 38-VIV210-01 Connecting Projector INPUT/OUTPUT Terminals and Jacks

Page 12

CONNECTING PROJECTOR

INPUT/OUTPUT TERMINALS AND JACKS

HDB 15-PIN INPUT TERMINAL

Connect computer output (Analog HDB 15-pin type) to this terminal.

(Refer to P13.)

AUDIO INPUT JACKS

Connect an audio output from computer to these jacks. (Refer to P13.)

CONTROL PORT CONNECTOR

This port is used to service this projector.

	SERIAL PORT	ANALOG RGB	AUDIO	CONTROL PORT
	IN TERMINAL	ANALOG RGB	R	L
			R	L

	If you control a projector by computer,		(MONO)
	you must connect a cable (not

provided) from your computer to this terminal.

L

INPUT 3 INPUT 2 INPUT 1

RESET BUTTON

This projector uses a micro processor to control a unit. Occasionally, this micro processor may malfunction and need to be reset. This can be done by pressing RESET button with a pen, which will shut down and restart unit. Do not use RESET function excessively.

	AUDIO OUT
SERIAL PORT IN	SERIAL PORT OUT	USB
R/C JACK	R	L
R/C JACK
RESET		(MONO)

SERIAL PORT

OUT TERMINAL

This terminal outputs signal from SERIAL PORT IN. More than two projectors can be controlled with one computer by connecting SERIAL PORT IN. of another projector to this terminal.

AUDIO OUTPUT JACKS		USB PORT (Series B)
Connect an external audio		This port is used to service
amplifier to these jacks.		this portt.
(Refer to P13.)

12

Image 12

Contents Model To the Owner Safety Instructions Compliances Federal Communication Commission NoticeTable of Contents Features and Design CompatibilityPreparation Name of Each Part of ProjectorSETTING-UP Projector Connecting AC Power CordPreparation Lens Installation Lens Shift AdjustmentPositioning Projector Preparation Picture Level and Tilt Adjustment Moving ProjectorConnecting Projector Replacement of TerminalTerminals of Projector Connecting Projector INPUT/OUTPUT Terminals and Jacks TerminalConnecting to Computer Cables used for connectionTOP Controls and Indicators Before OperationHOW to Operate ON-SCREEN Menu Operating ON-SCREEN MenuFlow of ON-SCREEN Menu Operation Before Operation Menu BAR Screen MenuBasic Operation Turning on / OFF ProjectorTurning on Projector Turning OFF ProjectorAdjusting Screen Zoom AdjustmentFocus Adjustment Keystone AdjustmentSound Adjustment Direct OperationMenu Operation Sound MenuVideo Input Selecting Input SourceSelecting Computer System Automatic MULTI-SCAN SystemComputer Input Compatible Computer Specifications ResolutionPC Adjustment Auto PC AdjustmentPC Adjust Menu Auto PC AdjComputer Input Manual PC Adjustment Display area Display area HFull screen Picture Image Adjustment Image Level Select DirectImage Level Select Menu Image Select MenuComputer Input Image Level Adjustment Image Adjust MenuPicture Screen Adjustment Screen MenuInput Menu InputSelecting Video System AutoAV System Menu Video or S-VIDEO AV System Menu Component VideoCinema Video Input Image Level Adjustment ColorTint Progressive scanZoom Natural wideSetting Setting MenuSetting Menu Power management Lamp ModeOn start Remote control Key lockLamp counter reset Factory defaultMaintenance AIR Filter Care and CleaningAppendix Appendix Lamp Management Yellow Lamp Dim Lamp Red Lamp Mark on LampAppendix Lamp Replacement Figure shows case of replacing LampCleaning Projection Lens Order Replacement LampTroubleshooting Problem Try these SolutionsService Technical SpecificationsAppendix Configurations of Terminals HDB 15-PIN Terminal AnalogPart No -A 610 309 4632 1AA6P1P4240-- M4RK