Christie Digital Systems 38-VIV210-01 Adjusting Screen, Zoom Adjustment, Focus Adjustment

BASIC OPERATION

ADJUSTING SCREEN

ZOOM ADJUSTMENT

1	Press ZOOM ▲/▼ button on Top Control. Message “Zoom” is
	displayed.
2	Press ZOOM ▲ button to make image larger, and press ZOOM
	▼ button to make image smaller.

Zoom

Message disappears after 4 seconds.

FOCUS ADJUSTMENT

1	Press FOCUS ▲/▼ button on Top Control. Message “Focus” is
	displayed.
2	Adjust focus of image by pressing FOCUS ▲/▼ button(s) .

Focus

Message disappears after 4 seconds.

LENS SHIFT ADJUSTMENT

1	Press LENS SHIFT button on Top Control. Message “Lens shift”
	is displayed.
2	Press POINT UP button to move image up, press POINT DOWN
	button to move image down.

�

Lens shift

�

Message disappears after 4 seconds.

�

KEYSTONE ADJUSTMENT

If a projected picture has keystone distortion, correct image with KEYSTONE adjustment.

1	Select Keystone on SETTING menu. (Refer to page 33.)
	Keystone dialog box appears.
2
	Correct keystone distortion by pressing POINT UP/DOWN		• Arrows are white in no correction.
	button(s). Press POINT UP button to reduce upper part of		• Arrow(s) of direction being corrected turn(s) red.
			• Arrow(s) disappear(s) at the maximum correction.
	image, and press POINT DOWN button to reduce lower part.
			• If you press the KEYSTONE button on Remote
			Control Unit once more while the keystone dialog box
			is being displayed, the keystone adjustment will be
			canceled.
			• Keystone function can not be operated when
			"NATURAL WIDE" is selected on PICTURE SCREEN
			Menu (P32).
			• If you select "NATURAL WIDE" after adjusting the
			keystone, the adjustment will be canceled.
	Reduce upper width with POINT UP button.	Reduce lower width with POINT DOWN button.

18