Cooper Lighting 84700 Section Maintenance, Periodic Maintenance, Interval Action

Page 20

9131 Rev. M

SECTION 4

MAINTENANCE

WARNING

INSTALLATION, SERVICE, MAINTENANCE OR OPERATION SHOULD BE PERFORMED BY QUALIFIED PERSONNEL ONLY.

4.1

PERIODIC MAINTENANCE

 

 

 

 

The CSC should be inspected periodically as shown below:

 

INTERVAL

ACTION

 

 

1 month

(A)

Visually inspect high voltage relays through clear

 

 

 

dead front cover.

 

3 months

(A)

Perform Control Functions checkout per Section

 

 

 

3.2.1.1 to verify proper operation.

 

6 months

(A)

Isolate the CSC and CCR from all sources of

 

 

 

electrical power.

 

 

(B)

Check all wiring connections for loose or missing

 

 

 

screws. Check terminal blocks and component

 

 

 

connections.

 

 

(C)

Check for broken or damaged wires and components.

 

 

(D)

Remove dust build up.

 

 

(E)

Inspect housing for rust or chipped paint. Clean and

 

 

 

touch up with paint as required.

 

 

(F)

Re-install all covers and restore primary power to the

 

 

 

CSC and CCR.

4.2

CORRECTIVE MAINTENANCE

 

 

In general, corrective maintenance is performed by the replacement of parts rather

 

than repair when they cease to function properly. The use of easily removable sub-

 

assemblies facilitates repair. The removal and replacement procedure should be

 

obvious to qualified maintenance personnel.

14

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Runway Circuit Selector Switch DocumentGFR REV Description LTR CHK APVJAS Limited Product Warranty Safety Notices Table of Contents Figures TablesSection General Information 1INTRODUCTION Equipment DescriptionInstallation Requirements Option Selection Chart Part NumbersUP to Three Options Number of CircuitsSection Theory of Operation9131 Rev. M Section Installation and Operation 1INSTALLATIONPage TERMINALS, Remove Jumper from only Those Terminals That Load is Being Connected to9131 Rev. M 9131 Rev. M 9131 2OPERATION Page Section Maintenance Periodic MaintenanceCorrective Maintenance Interval ActionServicing Without First Removing Power from For Installations Where the Power Distribution Panel isVoltages in Excess of 1000 Volts are Present When Regulator is OPERATING. do not Attempt Repair or9131 Rev. M 9131 Rev. M Troubleshooting Procedure Problem Possible Cause Test Corrective ActionProblem Possible Test Corrective Action Cause Reference Designation Section Parts List 1SCOPEArrangement 9131 Rev. M 9131 Rev. M 21a 9131 Rev. M Reference Quantity Description Crouse Designation Hinds Part Not UsedParts LIST, 84700-3 or Section Options Scope Page Part Number Used on 9131 Rev. M 9131 Rev. M 9131 Rev. M 9131 Rev. M 9131 Rev. M 9131 Rev. M 9131 Rev. M

84700 specifications

Cooper Lighting's 84700 is an advanced lighting solution that has gained popularity for its innovative features and exceptional performance in both residential and commercial applications. Designed with the modern user in mind, this lighting fixture provides a variety of benefits that cater to a wide range of needs.

One of the standout features of the Cooper Lighting 84700 is its energy efficiency. Utilizing LED technology, this fixture offers significant energy savings compared to traditional lighting options. The LED lights consume less power while providing a higher lumen output, contributing to reduced electricity bills and a lower environmental impact. This aspect is particularly appealing to businesses and homeowners looking to minimize their carbon footprint.

The 84700 is equipped with smart technology that allows users to easily control and customize their lighting experience. The fixture can be integrated with various smart home systems, enabling remote control through mobile devices or voice commands. This capability not only enhances convenience but also allows users to create specific lighting scenes to suit every occasion, from bright task lighting for work to soft, ambient lighting for relaxation.

Durability is another key characteristic of the Cooper Lighting 84700. Constructed with high-quality materials, it is built to withstand the demands of everyday use in various environments. The fixture is designed to last, which minimizes the need for frequent replacements and maintenance, making it a cost-effective choice in the long run.

The versatile design of the Cooper Lighting 84700 also allows it to blend seamlessly into any decor. Available in various finishes and styles, it can complement different architectural themes, making it suitable for a range of settings from modern to traditional.

In terms of safety, the 84700 meets all applicable building codes and regulations, ensuring it provides a secure lighting option for both indoor and outdoor use. Its robust construction means it can withstand the elements when used in exterior applications.

In conclusion, the Cooper Lighting 84700 stands out for its energy efficiency, smart technology integration, durability, versatile design, and safety features. These traits make it an ideal choice for those looking to enhance their lighting solutions, whether in residential or commercial settings. With the 84700, users can expect not only superior performance but also a stylish addition to their space that meets the demands of modern living.
Top Page Image Contents