Cooper Lighting 84700 Section General Information 1INTRODUCTION, Equipment Description

Page 7

9131

Rev. M

SECTION 1

GENERAL INFORMATION

1.1INTRODUCTION

1.1.1Purpose

This instruction book provides field support data and information for the FAA Type L-847 Runway Circuit Selector Switches manufactured by Crouse-Hinds Airport Lighting Products, Windsor, CT 06095. The equipment is herein after referred to as a CSC.

1.1.2Applicability

 

This instruction book applies only to that hardware bearing the part number series

 

84700. Instructions for standard options are provided in Section 6 of this document.

 

Refer to Table 1-1 for complete part number information.

1.2

EQUIPMENT DESCRIPTION

 

1.2.1Function

The FAA Type L-847 CSC is a power switching cabinet specifically designed for connection to the output of an FAA Type L-828 Airport Lighting Constant Current Regulator (CCR). It is capable of switching one or more series lighting circuits either locally or from a remote location, without affecting CCR operation.

1.2.2Features

The CSC is designed to accommodate lighting loads of up to 70KW at 20 amps and 30KW at 6.6 amps. Standard models are equipped with from one to four circuit capability in one NEMA 1 enclosure. Any combination of load circuits may be energized simultaneously. Modular construction has been utilized to provide ease of maintenance. A clear dead front cover allows safe inspection of high voltage components without the need to de-energize the lighting system.

1.2.3Options

A number of factory installed options are available. These options, listed in Table 1- 1, enable the customer to configure the CSC for a variety of specific applications. It is recommended that the customer contact Crouse-Hinds to verify the specific options required for an application prior to order submittal. Option -1 is installed on all units. See Section 3.1.4.

1.2.4Specifications

The following specification data applies to a standard model 84700 series CSC without options.

1

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Document Runway Circuit Selector SwitchJAS REV Description LTR CHK APVGFR Limited Product Warranty Safety Notices Table of Contents Tables FiguresEquipment Description Section General Information 1INTRODUCTIONInstallation Requirements Number of Circuits Option Selection ChartPart Numbers UP to Three OptionsTheory of Operation Section9131 Rev. M 1INSTALLATION Section Installation and OperationPage Terminals That Load is Being Connected to TERMINALS, Remove Jumper from only Those9131 Rev. M 9131 Rev. M 9131 2OPERATION Page Interval Action Section MaintenancePeriodic Maintenance Corrective MaintenanceRegulator is OPERATING. do not Attempt Repair or Servicing Without First Removing Power fromFor Installations Where the Power Distribution Panel is Voltages in Excess of 1000 Volts are Present When9131 Rev. M 9131 Rev. M Problem Possible Cause Test Corrective Action Troubleshooting ProcedureProblem Possible Test Corrective Action Cause Arrangement Section Parts List 1SCOPEReference Designation 9131 Rev. M 9131 Rev. M 21a 9131 Rev. M Not Used Reference Quantity Description Crouse Designation Hinds PartParts LIST, 84700-3 or Section Options Scope Page Part Number Used on 9131 Rev. M 9131 Rev. M 9131 Rev. M 9131 Rev. M 9131 Rev. M 9131 Rev. M 9131 Rev. M

84700 specifications

Cooper Lighting's 84700 is an advanced lighting solution that has gained popularity for its innovative features and exceptional performance in both residential and commercial applications. Designed with the modern user in mind, this lighting fixture provides a variety of benefits that cater to a wide range of needs.

One of the standout features of the Cooper Lighting 84700 is its energy efficiency. Utilizing LED technology, this fixture offers significant energy savings compared to traditional lighting options. The LED lights consume less power while providing a higher lumen output, contributing to reduced electricity bills and a lower environmental impact. This aspect is particularly appealing to businesses and homeowners looking to minimize their carbon footprint.

The 84700 is equipped with smart technology that allows users to easily control and customize their lighting experience. The fixture can be integrated with various smart home systems, enabling remote control through mobile devices or voice commands. This capability not only enhances convenience but also allows users to create specific lighting scenes to suit every occasion, from bright task lighting for work to soft, ambient lighting for relaxation.

Durability is another key characteristic of the Cooper Lighting 84700. Constructed with high-quality materials, it is built to withstand the demands of everyday use in various environments. The fixture is designed to last, which minimizes the need for frequent replacements and maintenance, making it a cost-effective choice in the long run.

The versatile design of the Cooper Lighting 84700 also allows it to blend seamlessly into any decor. Available in various finishes and styles, it can complement different architectural themes, making it suitable for a range of settings from modern to traditional.

In terms of safety, the 84700 meets all applicable building codes and regulations, ensuring it provides a secure lighting option for both indoor and outdoor use. Its robust construction means it can withstand the elements when used in exterior applications.

In conclusion, the Cooper Lighting 84700 stands out for its energy efficiency, smart technology integration, durability, versatile design, and safety features. These traits make it an ideal choice for those looking to enhance their lighting solutions, whether in residential or commercial settings. With the 84700, users can expect not only superior performance but also a stylish addition to their space that meets the demands of modern living.
Top Page Image Contents