Chief Manufacturing PL-1 Contents, Parts List, Tools Required for Installation

Installation Instructions PL-1

CONTENTS
DIMENSIONAL DRAWING	2
TOOLS REQUIRED FOR INSTALLATION	3
PARTS LIST	3
INSPECT INSTALLATION LOCATION	3
INSTALLATION	4

PARTS LIST

Prior to assembly, unpack the carton completely. Verify contents listed in Table 1.

Read installation instructions completely. If you are missing any of the listed parts, contact Customer Service at: 1-800/582-6480.

Table 1. Parts List

TOOLS REQUIRED FOR

INSTALLATION

•Allen wrench set

NOTE: Other tools may be required depending on your method of installation.

REF		DESCRIPTION	QTY
10	PL-1 Projector Lock		1
20	Screws		4
30	Spacers		4
PL1A*	Key C346A	OR	2
PL1B*	Key C346B	OR	2
PL1C*	Key C346C		2

*The PL-1 is shipped with two matching keys: PL1A, or PL1B, or PL1C. To ensure security, the PL-1 is shipped with one of three different keys.

INSPECT INSTALLATION

LOCATION

Because of the wide variety of possible mounting situations, Chief Manufacturing only provides general guidelines for the typical pole-mounted installation.

Study the following information carefully, and make adjustments as necessary to fit your specific installation.

WARNING

There is a potential for personal injury or equipment damage if the projector is not adequately mounted. Be aware of the overall weight of the equipment, including weight of projector and all attaching hardware.

3