Christie Digital Systems LX605 manual Basic Operation Menu Bar

Basic Operation

Menu Bar

For detailed functions of each menu, see “Menu Tree” on pages 73-75.

	Main Menu	Sub-Menu
①		Input 1	RGB(PC analog)
		Input 2	RGB
②
		Input 3	Video
③		Network
④
⑤
⑥
⑦
⑧
⑨
		System	Auto

⑩

①Input

Used to select an input source (Input 1, Input 2, Input 3 or Network) (p.33). Note: Network will be not displayed when optional Network unit is not attached.

②PC adjust

Used to adjust the parameters to match with the input signal format (pp.37-39).

③Image select

For computer source, used to select an image level among Standard, Real, and Image 1-10(p.40). For Video source, used to select an image level among Standard, Cinema, and Image 1-10(p.46).

④Image adjust

For computer source, used to adjust the computer image. [Contrast/Brightness/Color temp./White balance (R/G/B)/ Offset(R/G/B)/Sharpness/Gamma/Reset/Store] (pp.41-42).

For Video source, used to adjust the video image. [Contrast/Brightness/Color/Tint/Color temp./White balance (R/G/ B)/Offset (R/G/B)/Sharpness/Gamma/Noise Reduction/Progressive/Reset/Store] (pp.47-48).

⑤Screen

For computer source, used to adjust the size of the image. [Normal/True/Wide/Full/Custom/Digital zoom +/-/Keystone/ Ceiling/Rear/Reset] (pp.42-44).

For Video source, used to adjust the size of the image. [Normal/Wide/Custom/Keystone/Ceiling/Rear/Reset] (pp. 49- 50).

⑥Sound

Used to adjust the volume or mute the sound (p.28).

⑦Setting

Used to set the projector’s operating configurations (pp.51-62).

⑧Information

Display the input source information: Input, H-sync freq., V-sync freq., Screen, Language, Lamp status, Lamp counter, Filter counter, Power management, Key lock, PIN code lock, Shutter management, Simple mode, Remote control, and SERIAL NO. (p.29).

⑨Network

See the owner’s manual of “Network Set-up and Operation”.

⑩Guide

The key operation is displayed.

26	LX505/LX605 User Manual
	002-000232-01 Rev.1 (12-2009)