Video Input
Offset(Red/Green/Blue)
Press the Point ◄ button to lighten red/green/blue tone of the black level of an image; press the Point ► button to deepen red/ green/blue tone of the black level of an image (from 0 to 63).
Sharpness
Press the Point ◄ button to decrease the sharpness of the image; press the Point ► button to increase the sharpness of the image (from 0 to 31).
Gamma
Use the Point ◄► buttons to adjust the gamma value to obtain a better balance of contrast (from 0 to 15).
Noise reduction
Noise interference on the screen can be reduced. Press the Point ◄► buttons to change the noise reduction mode.
Off ........... Noise reduction mode is Off.
On ........... Noise reduction mode is On.
Progressive
An interlaced video signal can be displayed in progressive mode. Press the Point ◄► buttons to change the progressive scan mode. Off ........... Progressive scan mode is Off.
On ........... Progressive scan mode is On.
Film......... For watching a film. With this function, the projector
reproduces pictures faithful to the original film quality.
Reset
To reset the adjusted data, select Reset and press the SELECT | Store |
button. A confirmation box appears and then select Yes. All |
|
adjustments will return to their previous figures. |
|
Store |
|
To store the adjusted data, select Store and press the Point ► or |
|
the SELECT button. Use the Point ▲▼ buttons to select one from |
|
Images 1 to 10 and press the SELECT button. |
|
A confirmation box appears and then select Yes. Stored data can |
|
be called up by selecting an Image |
|
Selection on page 46. |
|
Where to store?
Image 1
Image 2
Image 3
Image 4
Image 5
Image 6
Image 7
Image 8
Image 9
Image 10
Note: |
|
• Noise reduction and Progressive cannot be selected when |
|
480p, 575p or 720p is selected (p.45). | A confirmation box |
• Noise reduction cannot be selected when 1080p is selected | appears and then |
(p.45). | select Yes. |
|
|
48 | LX505/LX605 User Manual |