Full, Custom, Digital zoom + | Christie Digital Systems LX605

Computer Input

Full

Provides the full screen image.

Custom

Adjust the screen scale and position manually with this function. Press the Point ►button at Custom and the Custom is displayed on the screen, you can use the Point ▲▼ buttons to choose the item you want to adjust.

Scale H/V	Adjust the Horizontal/Vertical screen scale.
H&V	When set to On, the aspect ratio is fixed.
	Scale V appears dimmed and becomes
	unavailable. Adjust Scale H, then the screen
	scale is automatically modified based on the
	aspect ratio.
Position H/V	Adjust the Horizontal/Vertical screen position.
Common	Save the adjusted scale to all the inputs.
	Press the SELECT button at Common to
	display a confirmation box. To save the scale,
	press the SELECT button at Yes. When
	Custom is selected, the saved scale is used.
Reset	Reset the all adjusted values. Press the
	SELECT button at Reset to display a
	confirmation box. To reset, press the SELECT
	button at Yes.

Custom

Note:

•When no signal is detected, Normal is set automatically and the Aspect dialog box disappears.

•The adjustable range for Scale H/V and Position H/V is limited depending on the input signal.

Digital zoom +

Select Digital zoom +. The On-Screen Menu disappears and D. zoom + appears. Press the SELECT button to expand the image size. Use the Point ▲▼◄► buttons to pan the image. The Panning function can work only when the image is larger than the screen size.

A projected image can be also expanded by pressing the D.ZOOM button on the remote control.

Digital zoom -

Select Digital zoom – . The On-Screen Menu disappears and D. zoom – appears. Press the SELECT button to compress image size.

The projected image can be also compressed by pressing the D.ZOOM button on the remote control.

To exit the Digital zoom +/– mode, press any button except the D.ZOOM button, SELECT and Point buttons.

To return to the previous screen size, select a screen size from the Screen Size Adjustment Menu or select an input source from the Input Source Selection Menu (see pages 33-35) again or adjust the screen size with the D.ZOOM button.

Note:

•The panning function may not operate properly if the stored Mode in the PC adjust Menu is used (p.39).

•The minimum compression ratio is limited depending on the input signal, when the Keystone function is working or when the custom is selected for the screen size.

•True, Full and Digital zoom +/– cannot be selected when 480i, 575i, 480p or 575p is selected in the PC System Menu (p.36).

•Digital zoom +/- cannot be selected when Full or True is selected.

•Digital zoom – cannot be operated when Custom is selected.

LX505/LX605 User Manual	43
002-000232-01 Rev.1 (12-2009)