Christie Digital Systems 38-VIV303-01 Connecting Projector, Terminals of Projector, Refer to P13

Page 12

CONNECTING PROJECTOR

TERMINALS OF PROJECTOR

This projector has input and output terminals on its back for connecting computers and video equipment. Refer to figures on pages 12 to 14 and connect properly.

COMPUTER AUDIO

INPUT 1/AUDIO MONITOR

OUTPUT JACK

This terminal is switchable and can be used as computer audio input 1 or audio monitor output (variable).

Set the terminal up as either Computer audio input 1 or Audio Monitor output properly before using this terminal.

COMPUTER INPUT/MONITOR OUTPUT TERMINAL (ANALOG)

This terminal is switchable and can be used as computer input or monitor output. Set the terminal up as either Computer input or Monitor output properly before using this terminal.

Refer to P13, P23.)

Note; This terminal outputs from 5 BNC type computer input on

COMPUTER INPUT

TERMINAL (DIGITAL)

Connect computer output (Digital DVI-D type) to this terminal.

HD (HDCP Compatible) signal can also be connected.

Refer to P13.)

COMPUTER AUDIO

INPUT 2 JACK

Connect an audio output (stereo) from computer to this jack.

(Refer to P13.)

Refer to P13, P23.)

INPUT 2 jacks only.

R/C JACK

USB CONNECTOR (Series B)

When controlling computer with Remote Control Unit of this projector, connect USB terminal of your personal computer to this terminal. (Refer to P13.)

RESET BUTTON

This projector uses a micro processor to control this unit, and occasionally, this micro processor may malfunction and need to be reset. This can be done by pressing RESET button with a pen, which will shut down and restart unit. Do not use RESET function excessively.

INPUT 1

ANALOG IN/OUT

DIGITAL(DVI-D)

R/C JACK

AUDIO 1

USB

RESET

CONTROL PORT

IN/OUT

 

 

AUDIO 2

 

G

B

 

R

H/V

V

VIDEO/Y

Cb/Pb

 

Cr/Pr

 

 

 

 

 

INPUT 2

 

 

VIDEO/Y Cb/Pb Cr/Pr

R–AUDIO–L

S–VIDEO

 

 

 

 

 

(MONO)

 

 

 

 

INPUT 3

 

 

When using Wired/Wireless Remote Control Unit as Wired Remote Control, Connect Wired Remote Control Unit to this jack with Remote Control Cable (supplied).

CONTROL PORT CONNECTOR

When controlling computer with Remote Control Unit of this projector, connect mouse port of your personal computer to this connector. (Refer to P13.)

5 BNC INPUT JACKS

Connect component video output (Y, Cb, Cr or Y, Pb, Pr) from video equipment to VIDEO/Y, Cb/Pb and Cr/Pr jacks or connect computer output {5 BNC Type (Green, Blue, Red, Horiz. Sync and Vert. Sync.)} from computer to G, B, R, H/V and V jacks. (Refer to P13 and 14.)

VIDEO INPUT JACKS

 

AUDIO INPUT JACKS

 

S-VIDEO INPUT JACK

Connect composite video

Connect an audio output

 

Connect S-VIDEO

output from video equipment

from video equipment to

 

output from video

to VIDEO/Y jack or connect

these jacks.

 

equipment to this

component video outputs to

(Refer to P14.)

 

jack. (Refer to P14.)

VIDEO/Y, Cb/Pb and Cr/Pr

 

 

 

jacks. (Refer to P14.)

 

 

 

12

Image 12
Contents Model To the Owner Safety Instructions Voor de klanten in NederlandCompliances Camden Drive Cypress, CA 90630 USATable of Contents Features and Design Compact Design Digital Zoom for ComputerPreparation Name of Each Part of ProjectorHOT AIR Exhausted SETTING-UP Projector Connecting AC Power CordFor U.S.A. and Canada For Continental Europe Preparation Lens Installation Positioning ProjectorRoom Light Preparation Adjustable Feet Installing Projector in Proper PositionPreparation Moving Projector Connecting Projector Terminals of ProjectorConnect computer output Digital DVI-D type to this terminal Refer to P13Connecting to Computer TerminalsA Projector Connecting to Video Equipment Operation of Remote Control Inside the Battery Compartment BOXBefore Operation Laser Pointer FunctionRemove battery Compartment lidSlide batteries into CompartmentTOP Controls and Indicators HOW to Operate ON-SCREEN Menu Operating ON-SCREEN MenuFlow of ON-SCREEN Menu Operation Press Menu Button while connecting to PC input source Used to adjust picture imageBefore Operation Menu BAR Used to selectBasic Operation Turning on / OFF ProjectorTurning on Projector Turning OFF ProjectorAdjusting Screen Keystone AdjustmentFocus adjustment may not function properly if the image is Corrected by Keystone adjustmentSound Adjustment Computer Input Selecting Input SourceSelecting Computer System Rgbav HdcpAutomatic MULTI-SCAN System AutoPC System Menu PC Adjustment Auto PC AdjustmentPC Adjust Menu Auto PC AdjComputer Input Manual PC Adjustment Display area Display area HFull screen Picture Image Select Image Level Select DirectImage Level Select Menu Image Select MenuPicture Screen Adjustment Screen MenuWhen video input signal is connected to Video jack Video InputVideo Select VideoSelecting Video System AutoAV System Menu Video or S-VIDEO AV System Menu Component VideoPicture level adjusted for picture with fine tone CinemaProvides image at a normal video aspect ratio of 4 Provides image at a wide screen ratio of 16Picture Image Adjustments Image Adjust MenuPicture Image List Mode Color temp White balance RedWhite balance Green White balance BlueSetting Setting MenuSetting Menu Anamorphic Blue backDisplay Menu positionTo change the code of the Remote Control Unit Power managementRemote control To change the code of ProjectorWireless Mouse mode Projector modeLamp counter reset Factory defaultOperating Wireless Mouse InstallationOperating Wireless Mouse AppendixMaintenance IndicatorIndicatorStation Appendix AIR Filter Care and Cleaning Cleaning Projection LensRecommendation Pull up and removeLamp Replacement Lamp ReplaceMessage Lamp replace counter reset? is displayed. Move Reset Lamp Replace CounterAppendix Lamp Replace Counter Pointer to Yes and then press Select buttonTroubleshooting Service Appendix Indicators and Projector Condition Appendix Compatible Computer Specifications ResolutionMenu Tree PC sourceSystem Setting Sound Technical Specifications Appendix Configurations of Terminals Control Port ConnectorUSB Connector Series B Computer INPUT-1 and Monitor OUT Terminals AnalogLens Replacement To the sales and service engineerAppendix Optional Parts Appendix Part No -A 610 309 0559 1AA6P1P4203-- MR3KL

38-VIV303-01 specifications

Christie Digital Systems 38-VIV303-01 is an innovative display solution designed for various professional environments, including corporate settings, control rooms, and entertainment venues. This model stands out due to its high-definition image quality and advanced technology, making it an excellent choice for users seeking superior visual performance.

One of the prominent features of the 38-VIV303-01 is its impressive resolution. With a native 1920x1080 resolution, it delivers sharp and detailed images, ensuring that content is displayed with exceptional clarity. This high resolution is vital for applications such as video conferencing, where clear visuals are essential for effective communication.

In terms of size, the 38-VIV303-01 boasts a generous 38-inch diagonal screen, making it suitable for both small and large venues. The display offers an ultra-thin bezel design, allowing for seamless multi-display configurations. This feature is particularly advantageous for users who require multiple screens for a panoramic viewing experience or for creating video walls to engage audiences effectively.

The display employs advanced LED backlighting technology, which enhances brightness and contrast, resulting in vibrant and lifelike colors. Additionally, the 38-VIV303-01 supports a wide color gamut, ensuring that colors are reproduced accurately and vividly. This is particularly important for applications in media production or graphic design, where color fidelity is paramount.

Christie Digital Systems has also incorporated intelligent energy-saving features into the 38-VIV303-01. This helps reduce power consumption without compromising performance, making the display an eco-friendly option. Users can benefit from extended lifespan and reduced operating costs, a crucial factor for businesses that rely on these systems for continuous operation.

Furthermore, the 38-VIV303-01 is designed with connectivity in mind. It comes equipped with multiple input ports, including HDMI and DisplayPort, enabling seamless integration with various devices such as laptops, desktops, and media players. This versatility ensures that users can easily connect and switch between different sources of content.

Overall, Christie Digital Systems 38-VIV303-01 is a robust and feature-rich display solution that caters to the needs of modern professional environments. With its superior image quality, advanced technologies, and enhanced connectivity, it provides a reliable platform for presenting information and engaging audiences effectively. Whether in control rooms, conference halls, or entertainment settings, the 38-VIV303-01 stands out as a powerful tool for enhancing visual communication.