Christie Digital Systems 38-VIV303-01 user manual To the Owner

Page 2

TO THE OWNER

Before operating this projector, read this manual thoroughly and operate the projector properly.

This projector provides many convenient features and functions. Operating the projector properly enables you to manage those features and maintains it in better condition for a considerable time.

Improper operation may result in not only shortening the product-life, but also malfunctions, fire hazard, or other accidents.

If your projector seems to operate improperly, read this manual again, check operations and cable connections and try the solutions in the “Trouble-shooting” section at the end of this booklet. If the problem still persists, contact the sales dealer where you purchased the projector or the service center.

SAFETY PRECAUTIONS

WARNING : TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PROJECTOR TO RAIN OR MOISTURE.

●This projector produces intense light from the projection lens. Do not stare directly into the lens. Eye damage could result. Be especially careful that children do not stare directly into the beam.

●This projector should be set in the way indicated. If not, it may result in a fire hazard.

● Take appropriate space on the top, sides and rear of the

 

 

 

SIDE and TOP

REAR

projector cabinet for allowing air circulation and cooling the

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

projector. Minimum distance should be taken. If the projector is

3.3" (1 m)

 

 

 

 

 

 

 

 

 

to be built into a compartment or similarly enclosed, the

 

 

 

 

 

 

 

 

 

 

 

minimum distances must be maintained. Do not cover the

 

 

 

 

 

 

 

 

 

 

 

ventilation slot on the projector. Heat build-up can reduce the

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

service life of your projector, and can also be dangerous.

 

 

3.3" (1 m)

3.3" (1 m)

3.3" (1 m)

●Do not put any flammable object or spray can near the projector, hot air is exhausted from the ventilation holes.

●The Remote Control Unit, supplied with this projector, emits a laser beam with the laser pointer function from Laser Light Window while pressing LASER button (for 1 minute / LASER POINTER INDICATOR lights red to indicate laser emission). Do not look into Laser Light Window or shine the laser beam on yourself or other people. Eye damage may result.

●If the projector is not to be used for an extended time, unplug the projector from the power outlet.

READ AND KEEP THIS USER'S MANUAL FOR LATER USE.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER- SERVICEABLE PARTS INSIDE EXCEPT LAMP REPLACEMENT. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT.

THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING AND MAINTENANCE INSTRUCTIONS IN THE USER'S MANUAL WITH THIS UNIT.

2

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Model To the Owner Safety Instructions Voor de klanten in NederlandCompliances Camden Drive Cypress, CA 90630 USATable of Contents Features and Design Compact Design Digital Zoom for ComputerHOT AIR Exhausted PreparationName of Each Part of Projector For U.S.A. and Canada For Continental Europe SETTING-UP ProjectorConnecting AC Power Cord Room Light Preparation Lens InstallationPositioning Projector Preparation Adjustable Feet Installing Projector in Proper PositionPreparation Moving Projector Connect computer output Digital DVI-D type to this terminal Connecting ProjectorTerminals of Projector Refer to P13A Projector Connecting to ComputerTerminals Connecting to Video Equipment Before Operation Operation of Remote ControlInside the Battery Compartment BOX Laser Pointer FunctionSlide batteries into Remove batteryCompartment lid CompartmentTOP Controls and Indicators Flow of ON-SCREEN Menu Operation HOW to Operate ON-SCREEN MenuOperating ON-SCREEN Menu Before Operation Menu BAR Press Menu Button while connecting to PC input sourceUsed to adjust picture image Used to selectTurning on Projector Basic OperationTurning on / OFF Projector Turning OFF ProjectorFocus adjustment may not function properly if the image is Adjusting ScreenKeystone Adjustment Corrected by Keystone adjustmentSound Adjustment Selecting Computer System Computer InputSelecting Input Source Rgbav HdcpPC System Menu Automatic MULTI-SCAN SystemAuto PC Adjust Menu PC AdjustmentAuto PC Adjustment Auto PC AdjComputer Input Manual PC Adjustment Full screen Display areaDisplay area H Image Level Select Menu Picture Image SelectImage Level Select Direct Image Select MenuPicture Screen Adjustment Screen MenuVideo When video input signal is connected to Video jackVideo Input Select VideoAV System Menu Video or S-VIDEO Selecting Video SystemAuto AV System Menu Component VideoPicture level adjusted for picture with fine tone CinemaProvides image at a normal video aspect ratio of 4 Provides image at a wide screen ratio of 16Picture Image Picture Image AdjustmentsImage Adjust Menu List Mode White balance Green Color tempWhite balance Red White balance BlueSetting Menu SettingSetting Menu Display AnamorphicBlue back Menu positionRemote control To change the code of the Remote Control UnitPower management To change the code of ProjectorLamp counter reset Wireless Mouse modeProjector mode Factory defaultOperating Wireless Mouse Operating Wireless MouseInstallation AppendixStation MaintenanceIndicatorIndicator Recommendation Appendix AIR Filter Care and CleaningCleaning Projection Lens Pull up and removeLamp Replacement Lamp ReplaceAppendix Lamp Replace Counter Message Lamp replace counter reset? is displayed. MoveReset Lamp Replace Counter Pointer to Yes and then press Select buttonTroubleshooting Service Appendix Indicators and Projector Condition Appendix Compatible Computer Specifications ResolutionMenu Tree PC sourceSystem Setting Sound Technical Specifications USB Connector Series B Appendix Configurations of TerminalsControl Port Connector Computer INPUT-1 and Monitor OUT Terminals AnalogAppendix Optional Parts Lens ReplacementTo the sales and service engineer Appendix Part No -A 610 309 0559 1AA6P1P4203-- MR3KL

38-VIV303-01 specifications

Christie Digital Systems 38-VIV303-01 is an innovative display solution designed for various professional environments, including corporate settings, control rooms, and entertainment venues. This model stands out due to its high-definition image quality and advanced technology, making it an excellent choice for users seeking superior visual performance.

One of the prominent features of the 38-VIV303-01 is its impressive resolution. With a native 1920x1080 resolution, it delivers sharp and detailed images, ensuring that content is displayed with exceptional clarity. This high resolution is vital for applications such as video conferencing, where clear visuals are essential for effective communication.

In terms of size, the 38-VIV303-01 boasts a generous 38-inch diagonal screen, making it suitable for both small and large venues. The display offers an ultra-thin bezel design, allowing for seamless multi-display configurations. This feature is particularly advantageous for users who require multiple screens for a panoramic viewing experience or for creating video walls to engage audiences effectively.

The display employs advanced LED backlighting technology, which enhances brightness and contrast, resulting in vibrant and lifelike colors. Additionally, the 38-VIV303-01 supports a wide color gamut, ensuring that colors are reproduced accurately and vividly. This is particularly important for applications in media production or graphic design, where color fidelity is paramount.

Christie Digital Systems has also incorporated intelligent energy-saving features into the 38-VIV303-01. This helps reduce power consumption without compromising performance, making the display an eco-friendly option. Users can benefit from extended lifespan and reduced operating costs, a crucial factor for businesses that rely on these systems for continuous operation.

Furthermore, the 38-VIV303-01 is designed with connectivity in mind. It comes equipped with multiple input ports, including HDMI and DisplayPort, enabling seamless integration with various devices such as laptops, desktops, and media players. This versatility ensures that users can easily connect and switch between different sources of content.

Overall, Christie Digital Systems 38-VIV303-01 is a robust and feature-rich display solution that caters to the needs of modern professional environments. With its superior image quality, advanced technologies, and enhanced connectivity, it provides a reliable platform for presenting information and engaging audiences effectively. Whether in control rooms, conference halls, or entertainment settings, the 38-VIV303-01 stands out as a powerful tool for enhancing visual communication.
Top Page Image Contents