Stacking Frame Installation Instructions
Introduction
Use the following instructions when installing stacking frames onto the models listed in Table 1. Only use the stacking frame provided by Christie (104-117101-01) to hoist or stack a maximum of three projectors. The stacking frame can also be connected to the integral rigging points on any Roadster/Mirage S+ and Roadster HD12k projectors. For information on the rigging hardware of these models, refer to section 2.2 Installation Considerations in the Roadster S+/HD & Mirage S+ User’s Manual.
Table 1. Projector Models | | RELEASED |
| | | |
| | | | |
| Projector Model | | | Model Number |
| | | | |
| Christie DS+4K | | 38-DSP104-xx | |
| | | |
| Christie DS+5K/Kc | | 38-DSP104-xx/38-DSP104-5x |
| | | |
| Christie DS+8K | | 38-DSP106-xx/38-DSP106-5x |
| | | | |
| DLV1920-DX | | | Control 2006 |
| | 104-017101-xx | |
| DLV1400-DX | | 38-DSP102-xx | |
| Christie DW3K/Kc | | 38-DHD103-xx/38-DHD1 3-5x |
| | | | |
| OFFICIALLY | | | 8, |
| Christie DW6K/Kc | | 38-DHD106-xx/38-DHD106-5x |
| Christie HD5K | | Document | | |
| | 104-006101-xx | |
| Mirage W6September104-013101-xx | |
| Christie HD5Kc | | 104-007101-xx | |
| Christie HD8K | | 104-008101-xx | |
| Christie HD8Kc | | 104-018101-xx | |
| Mirage S+2K | | 38-DSP102-xx/38-DSP102-5x |
| Mirage S+4K | | 38-DSP104-xx/38-DSP104-5x |
| | | |
| Mirage S+8K | | 38-DSP106-XX/38-DSP106-5X |
| | | | |
| Mirage W3 | | 104-012101-xx | |
| | | | |
| | | | |
| Mirage W8 | | 104-014101-xx | |
| | | | |
| Matrix 4000 | | 38-DSP104--xx | |
| | | | |
| Matrix W4 | | 104-016101-xx | |
| | | | | |
013-100342-01 (Rev.1) (08/06) | 1 of 12 pages |
