Stacking Frame Installation Instructions
Hoisting via Stacking Frame Handles
WARNING
When hoisting via the stacking frame handles it is mandatory to use at least four rigging points (two opposite sides). Straps must be placed on either side of designated label on the stacking frame handles.
1.If the projector is inverted retract the adjustable feet to prevent the hoisting hardware from becoming snagged. RELEASED
Always use at least two safety cables when hoisting
and attach them to the two eyebolts on the stacking frame.
2.Attach a safety cable to at least of the eyebolts
mounted on the bottom of the stacking frame. 2006
3.Secure the rigging components toControlthe appropriate rigging points. Refer to the designatedOFFICIALLYlabels on the stacking frame handles8, for rigging positions.
4.It is mandatory to useSeptemberfour riggingDocumentpoints. Ensu e the straps, clamps or cabling meet the ad quate load capacity for the total projector(s) w ight. DO NOT join the rigging straps or ca les to a
common point — keep separated.
Refer to Figure 4.WARNING
Figure 4. Four Rigging Points
7 of 12 pages |