Christie Digital Systems 38-VIV206-01 user manual Turning on / OFF Projector, Turning on Projector

Page 19

BEFORE OPERATION

TURNING ON / OFF PROJECTOR

TURNING ON PROJECTOR

1

Complete peripheral connections (with Computer, VCR, etc.)

before turning on projector. (Refer to "CONNECTING TO

 

PROJECTOR" on pages 11~13 for connecting that equipment.)

2

Connect a projector's AC Power Cord into an AC outlet. LAMP

Indicator lights RED, and READY Indicator lights GREEN.

 

NOTE : When “On start” function is ON, this projector is turned

 

on automatically by connecting AC Power Cord to an

 

AC outlet. (Refer to pages 35, 36.)

3

Press POWER ON-OFF button on Top control panel or on

Remote Control Unit to ON. LAMP Indicator dims, and Cooling

Fans start to operate. Preparation Display appears on a screen and count-down starts. Signal from PC or Video source appears after 30 seconds.

Current Input position and Lamp mode status are also displayed on screen for 5 seconds. (Refer to "LAMP MODE" on page 36.)

Input position and

Lamp mode status

Input 1

30

Preparation Display disappears after 30 seconds.

TURNING OFF PROJECTOR

1

Press POWER ON-OFF button on Top control panel or on

Remote Control Unit, and a message "Power off?" appears on a

 

screen.

2

Press POWER ON-OFF button again to turn off projector. LAMP

Indicator lights bright and READY Indicator turns off. After

projector is turned off, Cooling Fans operate (for 90 seconds). During this "Cooling Down" period, this appliance can not be turned on.

Power off?

Message disappears after 4 seconds.

3

When projector has cooled down, READY Indicator lights

GREEN again and you can turn projector on. After cooling down

completely, disconnect AC Power Cord.

TO MAINTAIN LIFE OF LAMP, ONCE YOU TURN

PROJECTOR ON, WAIT AT LEAST 5 MINUTES BEFORE

TURNING IT OFF.

When “Power Management” function is ON, projector detects signal interruption and turns off Projection Lamp automatically. Refer to “Power Management” on page 35.

When WARNING TEMP. Indicator flashes red, projector is automatically turned off. Wait at least 5 minutes before turning on projector again.

When WARNING TEMP. Indicator continues to flash, follow procedures below:

1.Press POWER ON-OFF button to turn a projector off and disconnect AC Power Cord from an AC outlet.

2.Check Air Filters for dust accumulation.

3.Clean Air Filters. (See "AIR FILTER CARE AND CLEANING" section on page 38.)

4.Turn a projector on again.

If WARNING TEMP. Indicator should still continue to flash, contact sales dealer where you purchased this projector or service center.

19

Image 19
Contents Model To the Owner Voor de klanten in Nederland Safety InstructionsFederal Communication Commission Notice CompliancesTable of Contents Compact Design Digital Zoom for Computer Features and DesignName of Each Part of Projector PreparationConnecting AC Power Cord SETTING-UP ProjectorFor U.S.A. and Canada For Continental Europe Lens Shift Adjustment Preparation Lens InstallationPositioning Projector Moving Projector Preparation Adjustable FeetAudio Input Jacks Connecting ProjectorUSB Connector Series B Terminals of ProjectorTerminals Projector Connecting to ComputerAudio Video Connecting to Video EquipmentBefore Operation Operation of Remote ControlLaser Pointer Function Focus Button Volume ButtonWired Remote Jack Zoom ButtonReady Indicator TOP Control Panel and IndicatorsOperating ON-SCREEN Menu HOW to Operate ON-SCREEN MenuFlow of ON-SCREEN Menu Operation Guide Window Before Operation Menu BARSound Menu Turning on Projector Turning on / OFF ProjectorTurning OFF Projector Keystone Adjustment Adjusting ScreenZoom Adjustment Focus AdjustmentSound Adjustment Input Menu Computer InputSelecting Input Source Selecting Computer SystemAuto PC AdjustmentAuto PC Adjustment Computer Input Automatic MULTI-SCAN SystemComputer Input Manual PC Adjustment Full screen Computer InputDisplay area Display area H1024 x 48.363 60.004 Computer Input Compatible Computer SpecificationsResolution 640 x 31.469 59.940Image 1~4 Picture Image AdjustmentImage Level Select Direct Image Level Select MenuImage Adjust Menu Computer Input Image Level AdjustmentScreen Menu Picture Screen AdjustmentVideo Video InputPAL / Secam / Ntsc / NTSC4.43 / PAL-M / PAL-N Component Video Signal FormatSelecting Video System Video InputCinema Video Input Image Level Adjustment To function that you want to select and then press Select Setting Menu SettingSetting Menu To change code of Projector To change code of Remote Control UnitWireless Mouse mode Projector modeOperating Wireless Mouse SETTING/APPENDIXOperating Wireless Mouse InstallationAIR Filter Care and Cleaning MaintenanceCleaning Projection Lens Lamp Replace Counter Appendix Lamp ReplacementTroubleshooting Service Technical Specifications USB Connector Series B Appendix Configurations of TerminalsPart No -A 610 302 1201 1AA6P1P3600-- MA8KM

38-VIV206-01 specifications

Christie Digital Systems has long been a leader in providing innovative visual display solutions, and their 38-VIV206-01 model stands out as a prime example of their commitment to quality and performance in the display technology sector. This model is particularly popular in environments that require high-performance visuals, such as control rooms, corporate environments, and immersive installations.

The 38-VIV206-01 boasts an impressive 38-inch display, offering vivid colors and stunning clarity that enhances the viewing experience. One of its primary features is its high-definition resolution, which delivers crisp images and fine details, making it ideal for applications that require precision and attention to detail.

In terms of technology, the 38-VIV206-01 leverages advanced LED backlighting technology, which not only improves energy efficiency but also produces a wider color gamut. This feature enables users to display a more extensive range of colors, ensuring that graphics and visuals appear more lifelike. Additionally, the display supports 4K resolution, allowing users to enjoy ultra-sharp images and fluid motion.

Another key characteristic of the 38-VIV206-01 is its design versatility. It can be seamlessly integrated into various setups, whether as a standalone display or as part of a larger video wall configuration. Its slim bezels contribute to an immersive viewing experience by minimizing distractions between multiple screens.

Connectivity is also a strong point of the 38-VIV206-01, which includes multiple input options such as HDMI, DisplayPort, and VGA. This flexibility allows users to connect various devices easily, making it suitable for diverse operational needs. The display also supports daisy chaining, simplifying multi-screen setups.

The 38-VIV206-01 is engineered for reliability, featuring robust construction that ensures longevity in demanding environments. It includes built-in thermal management to mitigate overheating, which is crucial for continuous operation.

Overall, the Christie Digital Systems 38-VIV206-01 is an exceptional choice for professionals looking for a high-quality display solution. Its cutting-edge features, combined with its reliability and versatile connectivity options, make it a valuable asset for any visual display requirement. Whether for business presentations, control room monitoring, or immersive multimedia environments, this model delivers top-tier performance.