Christie Digital Systems 38-VIV206-01 PC Adjustment, Computer Input Automatic MULTI-SCAN System

Page 23

COMPUTER INPUT

AUTOMATIC MULTI-SCAN SYSTEM

This projector automatically detects different types of computer resolutions such as VGA, SVGA, XGA or SXGA (refer to “COMPATIBLE COMPUTER SPECIFICATIONS” on page 26). When selecting Computer, this projector automatically detects incoming signal and projects proper image without any special setting. (Some computers need setting manually.)

Note : Projector may display one of following messages.

Auto

––––

When projector can not recognize connected signal as PC SYSTEM MENU PC system provided in this projector, Auto PC Adjustment

function operates to adjust projector and the message “Auto” is displayed on SYSTEM Menu icon.

When image is not provided properly, manual adjustment is required. (Refer to P24 and 25.)

There is no signal input from computer. Make sure connection of computer and the projector is set correctly. (Refer to TROUBLESHOOTING on page 40.)

PC SYSTEM Menu icon Displays system being selected.

D-VGA, D-SVGA or D-XGA

When digital computer signal is received on DVI terminal, above message is displayed on PC SYSTEM Menu icon.

SELECT COMPUTER SYSTEM MANUALLY

This projector automatically selects PC system among those provided in this projector and PC system can be also selected manually.

1

Press MENU button and ON-SCREEN MENU will appear. Press

the POINT LEFT/RIGHT buttons to move the red frame pointer

 

to PC SYSTEM Menu icon.

2

Press the POINT DOWN button to move the red arrow pointer to

 

the system that you want to set, and then press SELECT button.

PC SYSTEM MENU

PC SYSTEM Menu icon

Displays system being selected.

Systems on this dialog box can be selected.

Custom Mode (1~5) set in PC

ADJUST Menu. (P24, 25)

PC ADJUSTMENT

AUTO PC ADJUSTMENT

Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots and Picture Position to conform to your computer. Auto PC Adjustment function can be operated as follows.

 

Auto PC Adj.

 

1

Press MENU button and ON-SCREEN MENU will appear. Press

the POINT LEFT/RIGHT button to move the red frame pointer to

 

PC ADJUST Menu icon.

2

Press the POINT DOWN button to move the red frame pointer to

AUTO PC Adj. icon and then press SELECT button twice.

This Auto PC Adjustment can be also executed by pressing AUTO PC ADJ. button on the Top control panel or on the Remote Control Unit.

Store adjustment parameters.

Adjustment parameters from Auto PC Adjustment can be memorized in this projector. Once parameters are memorized, setting can be done just by selecting Mode in PC SYSTEM Menu (P23). Refer to step 3 of MANUAL PC ADJUSTMENT section (P25).

PC ADJUST MENU

PC ADJUST Menu icon

Move the red frame pointer to AUTO PC

Adj. icon and press SELECT button.

NOTE

●Fine sync, Total dots and Picture Position of some computers can not be fully adjusted with this Auto PC Adjustment function. When the image is not provided properly through this function, manual adjustments are required. (Refer to page 24, 25.)

●Auto PC Adjustment function can not be operated in Digital Signal input on DVI terminal and when “RGB”, “720p (HDTV)”, “1035i (HDTV)” or “1080i (HDTV)” is selected on PC SYSTEM Menu.

23

Page 22 Page 24
Image 23
Page 22 Page 24
Contents Model To the Owner Voor de klanten in Nederland Safety InstructionsFederal Communication Commission Notice CompliancesTable of Contents Compact Design Digital Zoom for Computer Features and DesignName of Each Part of Projector PreparationFor U.S.A. and Canada For Continental Europe SETTING-UP ProjectorConnecting AC Power Cord Positioning Projector Preparation Lens InstallationLens Shift Adjustment Moving Projector Preparation Adjustable FeetAudio Input Jacks Connecting ProjectorUSB Connector Series B Terminals of ProjectorTerminals Projector Connecting to ComputerAudio Video Connecting to Video EquipmentLaser Pointer Function Operation of Remote ControlBefore Operation Focus Button Volume ButtonWired Remote Jack Zoom ButtonReady Indicator TOP Control Panel and IndicatorsFlow of ON-SCREEN Menu Operation HOW to Operate ON-SCREEN MenuOperating ON-SCREEN Menu Sound Menu Before Operation Menu BARGuide Window Turning OFF Projector Turning on / OFF ProjectorTurning on Projector Keystone Adjustment Adjusting ScreenZoom Adjustment Focus AdjustmentSound Adjustment Input Menu Computer InputSelecting Input Source Selecting Computer SystemAuto PC AdjustmentAuto PC Adjustment Computer Input Automatic MULTI-SCAN SystemComputer Input Manual PC Adjustment Full screen Computer InputDisplay area Display area H1024 x 48.363 60.004 Computer Input Compatible Computer SpecificationsResolution 640 x 31.469 59.940Image 1~4 Picture Image AdjustmentImage Level Select Direct Image Level Select MenuImage Adjust Menu Computer Input Image Level AdjustmentScreen Menu Picture Screen AdjustmentVideo Video InputPAL / Secam / Ntsc / NTSC4.43 / PAL-M / PAL-N Component Video Signal FormatSelecting Video System Video InputCinema Video Input Image Level Adjustment To function that you want to select and then press Select Setting Menu SettingSetting Menu To change code of Projector To change code of Remote Control UnitWireless Mouse mode Projector modeOperating Wireless Mouse SETTING/APPENDIXOperating Wireless Mouse InstallationCleaning Projection Lens MaintenanceAIR Filter Care and Cleaning Lamp Replace Counter Appendix Lamp ReplacementTroubleshooting Service Technical Specifications USB Connector Series B Appendix Configurations of TerminalsPart No -A 610 302 1201 1AA6P1P3600-- MA8KM

38-VIV206-01 specifications

Christie Digital Systems has long been a leader in providing innovative visual display solutions, and their 38-VIV206-01 model stands out as a prime example of their commitment to quality and performance in the display technology sector. This model is particularly popular in environments that require high-performance visuals, such as control rooms, corporate environments, and immersive installations.

The 38-VIV206-01 boasts an impressive 38-inch display, offering vivid colors and stunning clarity that enhances the viewing experience. One of its primary features is its high-definition resolution, which delivers crisp images and fine details, making it ideal for applications that require precision and attention to detail.

In terms of technology, the 38-VIV206-01 leverages advanced LED backlighting technology, which not only improves energy efficiency but also produces a wider color gamut. This feature enables users to display a more extensive range of colors, ensuring that graphics and visuals appear more lifelike. Additionally, the display supports 4K resolution, allowing users to enjoy ultra-sharp images and fluid motion.

Another key characteristic of the 38-VIV206-01 is its design versatility. It can be seamlessly integrated into various setups, whether as a standalone display or as part of a larger video wall configuration. Its slim bezels contribute to an immersive viewing experience by minimizing distractions between multiple screens.

Connectivity is also a strong point of the 38-VIV206-01, which includes multiple input options such as HDMI, DisplayPort, and VGA. This flexibility allows users to connect various devices easily, making it suitable for diverse operational needs. The display also supports daisy chaining, simplifying multi-screen setups.

The 38-VIV206-01 is engineered for reliability, featuring robust construction that ensures longevity in demanding environments. It includes built-in thermal management to mitigate overheating, which is crucial for continuous operation.

Overall, the Christie Digital Systems 38-VIV206-01 is an exceptional choice for professionals looking for a high-quality display solution. Its cutting-edge features, combined with its reliability and versatile connectivity options, make it a valuable asset for any visual display requirement. Whether for business presentations, control room monitoring, or immersive multimedia environments, this model delivers top-tier performance.
Top Page Image Contents