Christie Digital Systems 103-002001 user manual Basic Operation, Turning on / OFF Projector

Page 19

BASIC OPERATION

TURNING ON / OFF PROJECTOR

TURNING ON PROJECTOR

1

Complete peripheral connections (with Computer, VCR, etc.)

before turning on projector. (Refer to "CONNECTING

 

PROJECTOR" on pages 11~13 for connecting the equipment.)

2

Connect the projector's AC Power Cord into an AC outlet. LAMP

Indicator lights RED, and READY Indicator lights GREEN.

 

NOTE : When “On start” function is ON, this projector is turned

 

on automatically by connecting AC Power Cord to an

 

AC outlet. (Refer to page 37.)

3

Press POWER ON-OFF button on Top Control or on Remote

Control Unit to ON. LAMP Indicator dims, and Cooling Fans

start to operate. Preparation Display appears on a screen and count-down starts. The signal from PC or Video source appears after 30 seconds.

Current Input position and Lamp mode status are also displayed on screen for 5 seconds. (Refer to "LAMP MODE" on page 37.)

Input position and

Lamp mode status

Computer 1

30

Preparation Display disappears after 30 seconds.

TURNING OFF PROJECTOR

1

Press POWER ON-OFF button on Top Control or on Remote

Control Unit, and a message "Power off?" appears on a screen.

2

Press POWER ON-OFF button again to turn off the projector.

LAMP Indicator lights bright and READY Indicator turns off.

 

After the projector is turned off, Cooling Fans operate (for 90

 

seconds). During this "Cooling Down" period, this appliance can

 

not be turned on.

3

When projector has cooled down, READY Indicator lights

GREEN again and you can turn the projector on. After cooling

down completely, disconnect AC Power Cord.

TO MAINTAIN THE LIFE OF LAMP, ONCE YOU TURN PROJECTOR ON, WAIT AT LEAST 5 MINUTES BEFORE TURNING IT OFF.

Power off?

Message disappears after 4 seconds.

When “Power Management” function is ON, projector detects signal interruption and turns off Projection Lamp automatically. Refer to “Power management” on pages 37.

When WARNING TEMP. indicator flashes red, projector is automatically turned off. Wait at least 5 minutes, confirm READY indicator will light green and projector may be turned on by pressing POWER ON-OFF button.

When both WARNING TEMP. and READY indicators to flash, a projector can not be turned on by pressing POWER ON- OFF button. In this case, follow procedures below:

1.Disconnect AC Power Cord from an AC outlet.

2.Turn a projector on again. (Refer to steps 2-3 of TURNING ON PROJECTOR on this page.)

When WARNING TEMP. indicator continues to flash, follow procedures below:

1.Disconnect AC Power Cord from an AC outlet.

2.Check Air Filters for dust accumulation.

3.Clean Air Filters. (See "AIR FILTER CARE AND CLEANING" section on page 41.)

4.Turn a projector on again. (Refer to steps 2-3 of TURNING ON PROJECTOR on this page.)

If WARNING TEMP. indicator should still continue to flash, contact sales dealer where you purchased this projector or service center.

19

Image 19
Contents Draft To the Owner Voor de klanten in Nederland Safety InstructionsFederal Communication Commission Notice CompliancesTable of Contents Compact Design Features and DesignName of Each Part of Projector PreparationHOT AIR Exhausted Connecting AC Power Cord SETTING-UP ProjectorFor U.S.A. and Canada For Continental Europe Room Light Preparation Positioning ProjectorMoving Projector Preparation Adjustable FeetMonitor Output Connecting ProjectorUSB Connector Series B Terminals of ProjectorProjector Connecting to ComputerConnecting Projector TerminalsAudio Video Connecting to Video EquipmentLaser Pointer Function Operation of Remote ControlInside the Battery Compartment BOX Before OperationSelect Button Point Volume + ButtonsTimer Button Zoom ButtonLamp Replace Indicator TOP Controls and IndicatorsOperating ON-SCREEN Menu HOW to Operate ON-SCREEN MenuFlow of ON-SCREEN Menu Operation Guide Window Before Operation Menu BARSound Menu Turning OFF Projector Basic OperationTurning on / OFF Projector Turning on ProjectorKeystone Adjustment Adjusting ScreenZoom Adjustment Focus AdjustmentSound Adjustment Selecting Input Source Computer InputRGB Auto Selecting Computer SystemPC System Menu Resolution Computer Input Compatible Computer SpecificationsXGA Auto PC Adj PC AdjustmentAuto PC Adjustment PC Adjust MenuComputer Input Manual PC Adjustment Display area H Display areaFull screen Image 1~4 Picture Image AdjustmentsImage Level Select Direct Image Level Select MenuImage Adjust Menu Computer Input Image Level AdjustmentScreen Menu Picture Screen AdjustmentVideo Video InputVideo AV System Menu Video or S-VIDEO Component Video Signal FormatSelecting Video System PAL / Secam / Ntsc / NTSC4.43 / PAL-M / PAL-NCinema Video Input Image Level Adjustment Provides image at a normal video aspect ratio of 4 Setting Menu SettingSetting Menu To change the code of Projector To change the code of the Remote Control UnitAppendix Lamp ReplacementLamp Replace Appendix Lamp Replace Counter Lamp Handling PrecautionsInstallation Operating Wireless MouseOperating Wireless Mouse Recommendation MaintenanceAIR Filter Care and Cleaning Cleaning Projection LensTroubleshooting Service Technical Specifications Computer INPUT-1 and Monitor OUT Terminals Analog Appendix Configurations of TerminalsControl Port Connector USB Connector Series BPOA-MACAP Appendix Optional PartsPOA-MCPS2 POA-MCMACIndicators and Projector Condition Indicators Projector ConditionPart No -A 610 309 0504 1AA6P1P4198-- MH7KA

103-002001 specifications

Christie Digital Systems 103-002001 is a robust and versatile solution designed to push the boundaries of visual display technology. Renowned for its reliability and performance, this product is ideal for diverse applications, ranging from corporate environments to cinematic experiences and entertainment venues.

One of the standout features of the Christie 103-002001 is its impeccable imaging capabilities. It supports a high native resolution that ensures crystal-clear visuals, making it suitable for applications where image quality is paramount. The device is engineered for high brightness, ensuring optimal visibility even in well-lit environments. This makes it an excellent choice for large venues like auditoriums, trade shows, and stadiums where ambient light cannot be controlled.

In terms of connectivity, the Christie 103-002001 boasts a variety of input options. It supports both digital and analog interfaces, accommodating a wide range of devices such as computers, video players, and streaming equipment. This versatility allows for seamless integration into existing setups, making it a flexible solution for businesses and event organizers.

The technology behind the Christie 103-002001 includes advanced projection methods that enhance color accuracy and uniformity. The use of cutting-edge optics ensures that images are not just bright but also rich in color depth, providing viewers with an immersive experience. The device is also equipped with intelligent processing technologies that optimize image scaling and aspect ratios, delivering a flawless presentation regardless of source material.

Durability is another key characteristic of the Christie 103-002001. Built with high-quality materials, it is designed for longevity and to withstand the rigors of frequent use. The device features efficient cooling systems that maintain optimal operating temperatures, ensuring consistent performance during extended periods of use, which is critical in environments like theaters and conference halls.

Additionally, the Christie 103-002001 incorporates user-friendly features, including intuitive controls and comprehensive remote management options. This simplifies operation and allows users to adjust settings quickly and easily, enhancing overall productivity.

In summary, the Christie Digital Systems 103-002001 is a powerhouse of visual technology that combines high resolution, versatile connectivity, and advanced imaging capabilities. Its durability and ease of use make it an invaluable asset for anyone looking to deliver exceptional visual experiences in professional environments.