Christie Digital Systems 103-002001 Maintenance, AIR Filter Care and Cleaning, Recommendation

Page 41

APPENDIX

MAINTENANCE

WARNING TEMP. INDICATOR

WARNING TEMP. Indicator flashes red and projector is automatically turned off when an internal temperature of the projector exceeds normal temperature. Wait at least 5 minutes before turning on projector again.

When WARNING TEMP. Indicator continues to flash, check the items listed below.

1

Ventilation Slots of the projector may be blocked. In such an event, reposition the projector so that Ventilation Slots

are not obstructed.

2

Air Filter may be clogged with dust particles. Clean Air Filter by following the section AIR FILTER CARE AND

CLEANING below.

3

If WARNING TEMP. Indicator remains on after performing the above checks, Cooling Fans or the Internal Circuits may

be malfunctioning. Contact service personnel from an authorized dealer or a service station.

AIR FILTER CARE AND CLEANING

Removable Air Filters prevents dust from accumulating on the surface of Projection Lens and Projection Mirror. Should Air Filters become clogged with dust particles, it will reduce Cooling Fans’ effectiveness and may result in internal heat build up and adversely affect the life of the projector. Clean Air Filters following the steps below:

1

Turn off the projector, and disconnect AC power cord from the

AC outlet.

2

Turn the projector upside down and remove four Air Filters by

pulling the latches upward.

3

Clean Air Filters with a brush or wash out dust and particles.

4

Replace four Air Filters properly. Make sure that Air Filters are

fully inserted.

5

Clean Air Intake Vent with a brush or wash out dust and

particles.

CAUTION

Do not operate the projector with Air Filter removed. Dust may accumulate on LCD Panel and Projection Mirror degrading picture quality.

Do not put small parts into Air Intake Vents. It may result in malfunction of the projector.

AIR FILTER

AIR INTAKE

Pull up and remove.

VENT

RECOMMENDATION

We recommend avoiding dusty/smoky environments when operating a projector. Usage in these environments may cause poor image quality.

When using under dusty or smoky conditions, dust may accumulate on a lens, liquid crystal panels, or optical elements inside the projector. This condition may degrade the quality of a projected image.

When the above symptoms are noticed, contact your authorized dealer or service station for proper cleaning.

CLEANING PROJECTION LENS

Follow these steps to clean Projection Lens:

1

Apply a non-abrasive camera lens cleaner to a soft, dry cleaning cloth. Avoid using an excessive amount of cleaner.

Abrasive cleaners, solvents or other harsh chemicals might scratch a surface.

2

3

Lightly wipe a cleaning cloth over Projection Lens.

When the projector is not in use, replace Lens Cover.

41

Page 40 Page 42
Image 41
Page 40 Page 42
Contents Draft To the Owner Voor de klanten in Nederland Safety InstructionsFederal Communication Commission Notice CompliancesTable of Contents Compact Design Features and DesignHOT AIR Exhausted PreparationName of Each Part of Projector For U.S.A. and Canada For Continental Europe SETTING-UP ProjectorConnecting AC Power Cord Room Light Preparation Positioning ProjectorMoving Projector Preparation Adjustable FeetUSB Connector Series B Connecting ProjectorTerminals of Projector Monitor OutputConnecting Projector Connecting to ComputerTerminals ProjectorAudio Video Connecting to Video EquipmentInside the Battery Compartment BOX Operation of Remote ControlBefore Operation Laser Pointer FunctionTimer Button Point Volume + ButtonsZoom Button Select ButtonLamp Replace Indicator TOP Controls and IndicatorsFlow of ON-SCREEN Menu Operation HOW to Operate ON-SCREEN MenuOperating ON-SCREEN Menu Sound Menu Before Operation Menu BARGuide Window Turning on / OFF Projector Basic OperationTurning on Projector Turning OFF ProjectorZoom Adjustment Adjusting ScreenFocus Adjustment Keystone AdjustmentSound Adjustment RGB Computer InputSelecting Input Source PC System Menu Selecting Computer SystemAuto XGA Computer Input Compatible Computer SpecificationsResolution Auto PC Adjustment PC AdjustmentPC Adjust Menu Auto PC AdjComputer Input Manual PC Adjustment Full screen Display areaDisplay area H Image Level Select Direct Picture Image AdjustmentsImage Level Select Menu Image 1~4Image Adjust Menu Computer Input Image Level AdjustmentScreen Menu Picture Screen AdjustmentVideo Video InputVideo Selecting Video System Component Video Signal FormatPAL / Secam / Ntsc / NTSC4.43 / PAL-M / PAL-N AV System Menu Video or S-VIDEOCinema Video Input Image Level Adjustment Provides image at a normal video aspect ratio of 4 Setting Menu SettingSetting Menu To change the code of Projector To change the code of the Remote Control UnitLamp Replace Lamp ReplacementAppendix Appendix Lamp Replace Counter Lamp Handling PrecautionsOperating Wireless Mouse Operating Wireless MouseInstallation AIR Filter Care and Cleaning MaintenanceCleaning Projection Lens RecommendationTroubleshooting Service Technical Specifications Control Port Connector Appendix Configurations of TerminalsUSB Connector Series B Computer INPUT-1 and Monitor OUT Terminals AnalogPOA-MCPS2 Appendix Optional PartsPOA-MCMAC POA-MACAPIndicators and Projector Condition Indicators Projector ConditionPart No -A 610 309 0504 1AA6P1P4198-- MH7KA

103-002001 specifications

Christie Digital Systems 103-002001 is a robust and versatile solution designed to push the boundaries of visual display technology. Renowned for its reliability and performance, this product is ideal for diverse applications, ranging from corporate environments to cinematic experiences and entertainment venues.

One of the standout features of the Christie 103-002001 is its impeccable imaging capabilities. It supports a high native resolution that ensures crystal-clear visuals, making it suitable for applications where image quality is paramount. The device is engineered for high brightness, ensuring optimal visibility even in well-lit environments. This makes it an excellent choice for large venues like auditoriums, trade shows, and stadiums where ambient light cannot be controlled.

In terms of connectivity, the Christie 103-002001 boasts a variety of input options. It supports both digital and analog interfaces, accommodating a wide range of devices such as computers, video players, and streaming equipment. This versatility allows for seamless integration into existing setups, making it a flexible solution for businesses and event organizers.

The technology behind the Christie 103-002001 includes advanced projection methods that enhance color accuracy and uniformity. The use of cutting-edge optics ensures that images are not just bright but also rich in color depth, providing viewers with an immersive experience. The device is also equipped with intelligent processing technologies that optimize image scaling and aspect ratios, delivering a flawless presentation regardless of source material.

Durability is another key characteristic of the Christie 103-002001. Built with high-quality materials, it is designed for longevity and to withstand the rigors of frequent use. The device features efficient cooling systems that maintain optimal operating temperatures, ensuring consistent performance during extended periods of use, which is critical in environments like theaters and conference halls.

Additionally, the Christie 103-002001 incorporates user-friendly features, including intuitive controls and comprehensive remote management options. This simplifies operation and allows users to adjust settings quickly and easily, enhancing overall productivity.

In summary, the Christie Digital Systems 103-002001 is a powerhouse of visual technology that combines high resolution, versatile connectivity, and advanced imaging capabilities. Its durability and ease of use make it an invaluable asset for anyone looking to deliver exceptional visual experiences in professional environments.
Top Page Image Contents