Christie Digital Systems 103-002001 user manual To change the code of Projector

Page 37

SETTING

Power management

This function turns Projection Lamp off when this projector detects signal interruption and is not used for a certain period in order to reduce power consumption and maintain the Lamp-life. (This projector is shipped with this function ON.)

Power Management function operates to turn Projection Lamp off when the input signal is interrupted and any button is not pressed over 5 minutes. This function operates as follows;

1.When any input signal is interrupted, “No signal” and the counting down display appears (for 5 minutes).

2.After counting down for 5 minutes, Projection Lamp and READY Indicator are turned off. (Cooling Fans keep running.)

3.READY Indicator starts to flash after cooling down Projection Lamp about for 90 seconds (Power Management mode).

In this Power Management mode, Projection Lamp is automatically turned on when the input signal is connected or projector is operated with any button on Top Control or on Remote Control Unit again.

On start

When this function is “On,” projector is automatically turned on just by connecting AC Power cord to a wall outlet.

Note ; Be sure to turn projector off properly (refer to the section “TURNING OFF PROJECTOR” on P19). If projector is turned off in the wrong steps, On Start function does not operate properly.

Time left until Lamp off.

Press SELECT button at this icon to display other items.

Lamp mode

When selecting the "" (Eco), the projector reduce the brightness and set into the low power consumption mode.

Remote control

This projector has eight different remote control codes; the factory- set normal code (Code 1) and the other seven codes (Code 2 to Code 8). This switching function prevents remote control operation mixture (jam) when operating several projectors or video equipment together.

For example operating projector in “Code 7,” both projector and Remote Control Unit must be switched to “Code 7.”

To change the code of Projector;

On

On

Code 1

Remote control

On

On

Press SELECT button at this icon to display previous items.

Move the pointer to the item and then press POINT LEFT/RIGHT button(s).

When pressing SELECT button at Remote control, Remote control code Menu appears.

To change the Remote control code of the projector used in ON- SCREEN MENU is selectable from Code 1 to Code 8.

To change the code of the Remote Control Unit;

To change the remote control code of the Remote Control Unit, set the DIP switches 1-3 inside the battery compartment box of the Remote Control Unit. (Refer to P14.)

Lamp counter reset

This function is used to reset Lamp Replace Counter. When replacing Projection Lamp, reset Lamp Replace Counter by using this function. Refer to page 38 for operation.

Code 1

37

Page 36 Page 38
Image 37
Page 36 Page 38
Contents Draft To the Owner Voor de klanten in Nederland Safety InstructionsFederal Communication Commission Notice CompliancesTable of Contents Compact Design Features and DesignName of Each Part of Projector PreparationHOT AIR Exhausted Connecting AC Power Cord SETTING-UP ProjectorFor U.S.A. and Canada For Continental Europe Room Light Preparation Positioning ProjectorMoving Projector Preparation Adjustable FeetUSB Connector Series B Connecting ProjectorTerminals of Projector Monitor OutputConnecting Projector Connecting to ComputerTerminals ProjectorAudio Video Connecting to Video EquipmentInside the Battery Compartment BOX Operation of Remote ControlBefore Operation Laser Pointer FunctionTimer Button Point Volume + ButtonsZoom Button Select ButtonLamp Replace Indicator TOP Controls and IndicatorsOperating ON-SCREEN Menu HOW to Operate ON-SCREEN MenuFlow of ON-SCREEN Menu Operation Guide Window Before Operation Menu BARSound Menu Turning on / OFF Projector Basic OperationTurning on Projector Turning OFF ProjectorZoom Adjustment Adjusting ScreenFocus Adjustment Keystone AdjustmentSound Adjustment Selecting Input Source Computer InputRGB Auto Selecting Computer SystemPC System Menu Resolution Computer Input Compatible Computer SpecificationsXGA Auto PC Adjustment PC AdjustmentPC Adjust Menu Auto PC AdjComputer Input Manual PC Adjustment Display area H Display areaFull screen Image Level Select Direct Picture Image AdjustmentsImage Level Select Menu Image 1~4Image Adjust Menu Computer Input Image Level AdjustmentScreen Menu Picture Screen AdjustmentVideo Video InputVideo Selecting Video System Component Video Signal FormatPAL / Secam / Ntsc / NTSC4.43 / PAL-M / PAL-N AV System Menu Video or S-VIDEOCinema Video Input Image Level Adjustment Provides image at a normal video aspect ratio of 4 Setting Menu SettingSetting Menu To change the code of Projector To change the code of the Remote Control UnitAppendix Lamp ReplacementLamp Replace Appendix Lamp Replace Counter Lamp Handling PrecautionsInstallation Operating Wireless MouseOperating Wireless Mouse AIR Filter Care and Cleaning MaintenanceCleaning Projection Lens RecommendationTroubleshooting Service Technical Specifications Control Port Connector Appendix Configurations of TerminalsUSB Connector Series B Computer INPUT-1 and Monitor OUT Terminals AnalogPOA-MCPS2 Appendix Optional PartsPOA-MCMAC POA-MACAPIndicators and Projector Condition Indicators Projector ConditionPart No -A 610 309 0504 1AA6P1P4198-- MH7KA

103-002001 specifications

Christie Digital Systems 103-002001 is a robust and versatile solution designed to push the boundaries of visual display technology. Renowned for its reliability and performance, this product is ideal for diverse applications, ranging from corporate environments to cinematic experiences and entertainment venues.

One of the standout features of the Christie 103-002001 is its impeccable imaging capabilities. It supports a high native resolution that ensures crystal-clear visuals, making it suitable for applications where image quality is paramount. The device is engineered for high brightness, ensuring optimal visibility even in well-lit environments. This makes it an excellent choice for large venues like auditoriums, trade shows, and stadiums where ambient light cannot be controlled.

In terms of connectivity, the Christie 103-002001 boasts a variety of input options. It supports both digital and analog interfaces, accommodating a wide range of devices such as computers, video players, and streaming equipment. This versatility allows for seamless integration into existing setups, making it a flexible solution for businesses and event organizers.

The technology behind the Christie 103-002001 includes advanced projection methods that enhance color accuracy and uniformity. The use of cutting-edge optics ensures that images are not just bright but also rich in color depth, providing viewers with an immersive experience. The device is also equipped with intelligent processing technologies that optimize image scaling and aspect ratios, delivering a flawless presentation regardless of source material.

Durability is another key characteristic of the Christie 103-002001. Built with high-quality materials, it is designed for longevity and to withstand the rigors of frequent use. The device features efficient cooling systems that maintain optimal operating temperatures, ensuring consistent performance during extended periods of use, which is critical in environments like theaters and conference halls.

Additionally, the Christie 103-002001 incorporates user-friendly features, including intuitive controls and comprehensive remote management options. This simplifies operation and allows users to adjust settings quickly and easily, enhancing overall productivity.

In summary, the Christie Digital Systems 103-002001 is a powerhouse of visual technology that combines high resolution, versatile connectivity, and advanced imaging capabilities. Its durability and ease of use make it an invaluable asset for anyone looking to deliver exceptional visual experiences in professional environments.
Top Page Image Contents