English
36
Timeout(Min.)
Once "Security" is activated to "On", the administrator can set timeout function.
•Press 
or 
to select the timeout interval.
•The range is from 10 minute to 990 minutes.
•When the time is up, the projector will prompt the user to enter the password again.
•The factory default setting of "Timeout(Min.)" is "Off".
•Once the security function is enabled, the projector will request user to enter password when switch on the projector . Both "User Password" and "Administrator Password" can be accepted for this dialogue.
User password
•Press 
to setup or change the "User Password".
•Press number keys to set your password on the remote control and press "MENU" to confirm.
•Press 
to delete character.
•Enter the password when you see "Confirm Password" displayed.
•The password should be between 4 and 8 characters long.
•If you select "Request password only after plugging power cord", the projector will prompt the user to enter the password every time the power cord is plugged.
•If you select "Always request password while projector turns on", the user has to enter the password every time when the projector is turned on.
Administrator Password
The "Administrator Password" can be used in both the "Enter
Administrator Password" and "Enter Password" dialog boxes.
•Press 
to change the "Administrator Password".
•The factory default of "Administrator Password" is "1234".
If you forgot your administrator password, do the following to retrieve the administrator password:
•An unique
•If losing this security card and number, please contact with an Acer service center.
Lock User Startup Screen
•Default Lock User Startup Screen is "OFF". If lock user startup screen is "ON", users cannot change startup screen anymore and avoid other users change that arbitrarily. Choose "OFF" to unlock startup screen.
VGA OUT (Standby) Default is "Off". Choose "On" to enable VGA OUT connection.