BOXLIGHT CP-635i user manual Air Filter, Other Maintenance

Page 20

MAINTENANCE (continued)

Air Filter

Cleaning the air Filter

The air filter should be cleaned as described below at intervals of approximately 100 hours.

1.Switch the projector power supply OFF, and remove the power cord from the power outlet.

2.Clean the air filter with a vacuum cleaner.

Replacing the Air Filter

Replace the air filter if contamination cannot be removed, or if it is damaged.

1.Remove the filter cover.

2.Remove the old filter.

3.Set the new filter and the filter cover.

CAUTION • Switch power OFF and remove the power cord from the power outlet before beginning maintenance work. Please read the separate “SAFETY

INSTRUCTIONS” thoroughly to ensure that maintenance is performed correctly.

Replace the air filter if contamination cannot be removed, or if it is damaged. Contact BOXLIGHT for service. For the optional air filter, see the item “Optional Parts” of the Table 12.

Do not use the equipment with the air filter removed.

When the air filter is clogged with dust etc. the power supply is switched OFF automatically to prevent the temperature rising inside the projector.

ENGLISH

Other Maintenance

Maintenance Inside the Equipment

For safety reasons, ensure that the equipment is cleaned and checked by BOXLIGHT once every two years. Maintaining the equipment by yourself is dangerous.

Cleaning the Lens

Gently wipe the lens with lens cleaning paper. Do not touch the lens with your hands.

Cleaning the Cabinet and Remote control transmitter

Gently wipe with a soft cloth. If dirt and stains etc. are not easily removed, use a soft cloth dampened with water, or water and a neutral detergent, and wipe dry with a soft, dry cloth.

CAUTION • Switch power OFF and remove the power cord from the power outlet before beginning maintenance work. Please read the separate “SAFETY

INSTRUCTIONS” thoroughly to ensure that maintenance is performed correctly.

Do not use detergents or chemicals other than those noted above (e.g. benzene or thinners).

Do not use cleaning sprays.

Do not rub with hard materials, or tap the equipment.

ENGLISH-19

Image 20
Contents CP-635i Contents Before USE FeaturesContents of Package Component Video Before USEPart Names Position Button Reset Button Menu Button Magnify Button Volume Button Freeze Button Auto Button Battery HolderButton Video Button RGB Button Menu Select ButtonLoading the Battery Fixing the HandleFirst Loading ReplacingInstallation Installation of the Projector and ScreenAngle Adjustment Installation ReferenceCabling InstallationCabling Plug & Play Power ConnectionExample of System Setup Power on Power OFFOperations StandbyBasic Operation Description OperationsBasic Operation Set / Clear Keystone Mode Press the Keystone Adjust Keystone PressNormal menu Single menu Menu Display Start/Stop Press the Menu buttonSetup Menu Setup MenuSelect Image Aspect Ratio Select Position of ImageAutomatic Adjustment at RGB Input Select the Execute with Automatic Adjustment at Video Input Select the Execute withInput Menu Input MenuSetup Initial Screen Display Select Turn on with Select Color TemperatureImage Menu Image Menu DescriptionSet / Clear Whisper Mode Press Options MenuOptions Menu Description Select Menu Background Color Select withNo Signal Menu No Signal Menu DescriptionLamp Life MaintenanceLamp Replacing the Lamp MaintenanceResetting the Lamp Timer Other Maintenance Air FilterTroubleshooting Message ContentsOSD Message OSD MessageTroubleshooting Indicators MessageIndicators Message IndicatorSymptom Possible cause Remedy SymptomSymptom Specifications SpecificationsWarranty Limited WarrantyQR53221