BOXLIGHT CP-635i user manual Installation of the Projector and Screen, Angle Adjustment

Page 7

INSTALLATION

Installation of the Projector and Screen

Refer to the drawing and table below for determining the screen size and projection distance.

The projection distances shown in the table below are for full size (800 x 600 dots).

a: Distance from the projector to the screen. (±10%)

Table 1. Installation Reference

Screen size

 

a [inches (m)]

 

[inches (m)]

 

 

Min.

Max.

 

 

 

 

 

 

40

(1.0)

62

(1.6)

82

(2.1)

 

 

 

 

 

 

60

(1.5)

94

(2.4)

123

(3.1)

 

 

 

 

 

 

80

(2.0)

127

(3.2)

164

(4.2)

 

 

 

 

 

 

100

(2.5)

160

(4.1)

205

(5.2)

 

 

 

 

 

 

120

(3.0)

192

(4.9)

246

(6.3)

 

 

 

 

 

 

150

(3.8)

241

(6.1)

308

(7.8)

 

 

 

 

 

200

(5.0)

323

(8.2)

411 (10.4)

 

 

 

 

 

 

a

Top View

Side View

CAUTION • Install the projector in a suitable environment according to instructions of the accompanying manual “SAFETY INSTRUCTIONS” and this manual.

When you fix this unit with a metal tool and the like, you must connect it with ground wire; otherwise, fire or electric shock can result.

Connect the ground terminal of AC inlet of this unit with the ground terminal provided at the building using an optional three-core power-supply cord.

Please basically use liquid crystal projector at the horizontal position. If you use liquid crystal projector by the lens up position, the lens down position and the side up position, this may cause the heat inside to build up and cause damage. Be especially careful not to install it with ventilation holes blocked.

Do not install LCD projector in smoke effected environment. Smoke residue may buildup on critical parts (i.e.LCD panel, Lens Assy etc.).

Angle Adjustment

Use the foot adjusters on the bottom of the projector to adjust the projection angle. It is variable within 0˚ to 9˚ approximately.

Foot Adjuster

Press the foot adjuster button

Rear Foot Adjuster

1.Lift up the front side of the projector, and pressing the foot adjuster button, adjust the projection angle.

2.Release the button to lock at the desired angle.

3.Use the rear foot adjuster to adjust the left-right slope. Do not force the foot adjuster screw. This could damage the adjuster or cause the lock to fail.

CAUTION • Do not release the foot adjuster button unless the projector is being held; otherwise, the projector could overturn or fingers could get caught and cause personal

injury.

ENGLISH-6

Image 7
Contents CP-635i Contents Contents of Package FeaturesBefore USE Part Names Before USEComponent Video Video Button RGB Button Menu Select Button Position Button Reset Button Menu Button Magnify ButtonVolume Button Freeze Button Auto Button Battery Holder ButtonReplacing Loading the BatteryFixing the Handle First LoadingInstallation Reference InstallationInstallation of the Projector and Screen Angle AdjustmentCabling InstallationCabling Example of System Setup Power ConnectionPlug & Play Standby Power onPower OFF OperationsBasic Operation OperationsBasic Operation Description Menu Display Start/Stop Press the Menu button Set / Clear Keystone Mode Press the KeystoneAdjust Keystone Press Normal menu Single menuSelect Position of Image Setup MenuSetup Menu Select Image Aspect RatioInput Menu Automatic Adjustment at RGB Input Select the Execute withAutomatic Adjustment at Video Input Select the Execute with Input MenuImage Menu Description Setup Initial Screen Display Select Turn on withSelect Color Temperature Image MenuSelect Menu Background Color Select with Set / Clear Whisper Mode PressOptions Menu Options Menu DescriptionNo Signal Menu Description No Signal MenuLamp MaintenanceLamp Life Resetting the Lamp Timer MaintenanceReplacing the Lamp Air Filter Other MaintenanceOSD Message TroubleshootingMessage Contents OSD MessageIndicator TroubleshootingIndicators Message Indicators MessageSymptom SymptomSymptom Possible cause Remedy Specifications SpecificationsLimited Warranty WarrantyQR53221