Onkyo R-801A Using the timer, Timer button, Buttons, Enter button, Timer setting modes

Using the timer

The R-801A features a Timer function that enables you to start playing or recording a specified component at a specified time. To use this function, you need to connect this unit to other

components via REMOTE CONTROL jacks. Refer to “Connecting the connectors and

AC OUTLETS” through “Connecting the remote control cables” on pages 12 – 15 for more information on making the connections. The timer function can be performed only by using the remote controller.

Buttons and modes for the Timer function (remote controller only)

	STANDBY/ ON
			ACOUSTIC
			PRESENCE
	CDR/PC	TAPE
			INPUT SELECTOR
	CD/DVD	MD	FM	AM
		VOLUME
	TAPE REW		UP	TAPE FF
		MUTING
		DOWN
	SLEEP	CLOCK	TIMER	ENTER
TIMER	MODE		TAPE	ENTER
	REPEAT		CD/DVD
	CLEAR		MD
	SCROLL		CDR

The following buttons and setting modes are used to operate the Timer function.

TIMER button

Use this button to select a timer mode. The timer mode will change each time you press this button.

/ buttons

Use these buttons to select the details of the mode or to change values.

ENTER button

Use this button to enter the selected mode or numbers.

Timer setting modes:

• W.DAY (WEEKDAY): This mode enables

you to listen to a specified component at

Number buttons

Notes

1 2 3 4

5 6 7 8

9 10/0 --/---

REMOTE CONTROLLER RC-466S

a designated time on weekdays. You can

change the day of the week in DAY SET

mode.

• W.END (WEEKEND): This mode enables

you to listen to a specified component at

a designated time on weekends. You can

change the day of the week in DAY SET

mode. You can define the same day of

the week as both WEEKDAY and WEEK-

END. To set two programs for one day,

specify the same day of the week as

WEEKDAY and WEEKEND and se the time

for each program.

•You can use only the , , TIMER, ENTER, and number buttons for the timer setting. If you use the other buttons, the timer will not be set correctly.

•The explanation in this section assumes that the unit has been powered on (set to “Standby On”).

38

•	REC: This mode enables you to record
	your favorite broadcasting program(s)
	starting at a designated time. You can
	select from NEXT, the day of the week,
	and EVERYDAY. Except for EVERYDAY, the
	unit performs the timer recording once at
	the designated time.
•	DAY SET: This mode enables you to
	change the day setting (definition) of
	WEEKDAY or WEEKEND.
•	ADJUST: This mode enables you to set
	and adjust the clock.
	If you have adjusted the clock, you do not
	need to set it again.