Onkyo R-801A instruction manual Directional Iinkage, Connecting the 300 ohm ribbon wire

Page 19

Connecting the antenna cable to the 75/300 ohm antenna adapter (Non- European models)

Connecting the 300 ohm ribbon wire:

Loosen the screws and wrap the wire around these screws. Then tighten the screws with a screwdriver.

Outdoor	Indoor
antenna	antenna

300 ohms ribbon wire

Connecting the coaxial cable:

1.With your ﬁngernail or a small screw- driver, press the stoppers outward and remove the cover.

2.Remove the transformer wire A from slit B and insert it into slit C.

3.Prepare the coaxial cable as shown in the diagram.

Connect the 75/300 ohm antenna adapter to the coaxial cable.

1 Insert the end of the cable.

2 Clamp it in place with pliers.

4.Re-install the cover.

					Slit B
					Wire A
Slit C
		✦
✦	✦		✦
✦✦		✦ ✦	✦
	✦ ✦
		6	3	6	1
	mm mm mm				1
		15mm

2

Directional Iinkage

Directional Iinkage type splitter

To R-801A

To TV (or VCR)

Do not use the same antenna for both FM and TV (or VCR) reception since the FM and TV (or VCR) signals can inter- fere with each other. If you must use a common FM/TV (or VCR) antenna, use a directional linkage type splitter.

19

Image 19

Contents 801A Important Safeguards S2898A For British model PrecautionsModele pour les Canadien For U.S. modelFCC Information for User For Canadian modelSupplied accessories Main FeaturesLow impedance drive discrete output Trol Stage Table of contents Sleep Timer Auto Power OnRemote Control Operation Program TimerCombination example Arranging the system componentsVertical way stacking Before connecting Connecting to the audio connectorAnalog Output Connections for combination exampleConnections Connecting the connectors and AC OutletsRemote Control OUT OUT CDR/PC Connecting audio/video equipment to audio connectorsWith no built-in ampliﬁer Connecting a subwooferWhen connecting a subwoofer With a built-in ampliﬁerToggling between CD and DVD for the input display Connecting the remote control cablesPreparing the speaker cords for connection Connecting speaker systemsConnecting left and right speakers Connecting the speaker cords to the speaker connectorsAntenna connections Connecting the AM antennaFM indoor antenna Connecting the FM antennaFM outdoor antenna Connecting the coaxial cable Connecting the 300 ohm ribbon wireDirectional Iinkage Installing the remote controller batteries Preparing the remote controllerUsing the remote controller STANDBY/ON indicator Connecting the AC power cord mains leadTime indicator turns off Setting the ClockSetting the clock automatically European models only Plug in the power cordConﬁrming/changing the RDS station used by Accuclock TimerEnter STANDBY/ON Setting the clock manuallyTip Press the Enter button to conﬁrm the settingNumber buttons Use Button Number buttons to set the desired Press the Enter buttonClock While the unit is in Standby/Off modeWhile the power to the unit is turned on Clock Call functionVolume Input VolumeChoosing the required source Acoustic Presence Adjusting the soundMuting Muting Muting/Listening with the headphonesListening with the headphones Muting the soundPrepare the recording component RecordingInput Before recordingReceiving stations Tuning the radioUsing Auto Memory FM only Presetting your favorite stationsPress the Memory button Tuning in FM stationsTuning in the AM stations MemoryClearing preset stations Selecting preset stationsPress the FM Mode button Display Memory Naming a preset stationNaming a preset station Input √TUNINGPress and hold the Display button for a few seconds Memory √TUNINGChanging the existing characters Select the station you wish to modifyUse the √TUNING / con- trol to change the character FM ModeClearing all names stored in memory Display What is RDS?Receiving RDS European models only Displaying Radio Text RTButtons Using the timerTimer button Timer setting modesPress the or button to select Weekend or Weekday Changing the Weekday and Weekend settingsProgramming to play at a speci- ﬁed time Using the timerProgramming to record at a spec- iﬁed time Button to select Press the or button to switch the selected mode on or OFF Switching the timer ON/OFFPress the Enter button to conﬁrm the selection Start playing something you would like to listen to Cancelling the Sleep settingSleep function SleepAcoustic Index to parts and controlsFront panel DisplayDayset Remote controllerAdjust RECMD recorder control Stereo cassette tape deck controlDVD/CD player control CD player or changer / MD recorder CD recorder controlSymptom Cause TroubleshootingRDS function Speciﬁcations General Clock precision Power supplyPower consumption WeightOnkyo Europe Electronics GmbH Onkyo U.S.A. CorporationOnkyo China Limited