INSTALLATION
ADJUSTABLE FEET
Picture tilt and projection angle can be adjusted by rotating the ADJUSTABLE FEET. Projection angle can be adjusted 0 to 6°.
1.Lift the front of the projector and press the FEET LOCK LATCHES on both sides of the projector.
2.Release the FEET LOCK LATCHES to lock the ADJUSTABLE FEET and rotate the ADJUSTABLE FEET to fine tune the position and the tilt.
3.To shorten the ADJUSTABLE FEET, lift the front of the projector and press and undo the FEET LOCK LATCHES.
FEET LOCK LATCHES
DOWN
DOWN
NOTE: The position and the keystone distortion of the image can also be adjusted using the KEYSTONE function.
(See pages 28, 35 and 45).
UP
UP
ADJUSTABLE
FEET
MOVING THE PROJECTOR
Use the carrying handle when moving the projector. Replace the lens cover and retract the adjustable feet when moving the projector to prevent damage to the projector.
CAUTION IN CARRYING OR TRANSPORTING THE PROJECTOR
●Do not drop or bump the projector, otherwise damages or malfunctions may result.
●When transporting the projector, use a Boxlight recommended Carrying Case.
●Do not transport the projector by using a courier or transport service in an unsuitable transport case. This may cause damage to the projector. To transport the projector through a courier or transport service, use a Boxlight recommended Case.
●For a carrying or transportation cases, contact a Boxlight at
8