Acer AL1703 manual Safety, Electrical, Common

Page 3

SAFETY

 

Note: Please note the following safety precaution before using this monitor.

 

 

Electrical

 

 

 

Sure the Voltage

Before connecting the AC power cord to the DC adapter socket, make sure that

 

voltage of the DC adapter is suitable for local power.

Electrical Shock

Do not insert any metal object into opening on the LCD monitor casing to prevent

 

electrical shock.

 

To prevent electrical shock, do not touch the interior of the LCD monitor. Only a

 

qualified technician should open the casing of monitor.

 

If the power cord is damaged, do not use the LCD monitor. Do not place any object on

 

the power cord, and place the power cord away from crowded areas.

 

While pulling the LCD monitor plug away from the socket on the wall, hold the plug not

 

the power cord.

 

Do not expose the LCD monitor in the rain or somewhere closed to the water (such as

 

in the kitchen, near the pool).

 

If the LCD monitor is dampened, please unplug the power cord and contact Service

 

Center.

Unusual condition

If the LCD monitors functions improperly, especially when making unusual noise or

 

spreading strange odor, unplug it immediately and contact service center.

Common

 

Monitor and Screen

Avoid touching the screen with your fingers or any tough objects. Oil from the skin is

Care

difficult to remove, and touching objects to the screen may damage the panel. It is

 

suggested to clean the monitor by first turning it off and using a soft, dry cloth.

 

The LCD monitor should be placed in areas with low humidity and less dust. Please

 

watch out for environmental conditions on humidity and ventilation.

 

The LCD monitor should be kept away from heat sources and irradiation. For

 

example: kitchen, oven or direct sunlight and etc.

 

To reduce glare, avoid placing the monitor in a place that receives direct sunlight.

 

Avoid letting small children play with monitor. The frequent touching of the panel will

 

cause panel to look dirty and will affect the quality of the brightness if too dirty.

 

If moving the monitor, please handle with care when unplugging and moving it.

 

Do not place items over the monitor when placing and adjusting the LCD monitor.

 

If the LCD monitor is not in use for a long time, please unplug it and restore it into the

 

proper package, the original carton & packaging stuffs are preferred.

 

The opening on the LCD Monitor casing is for the purpose of ventilation. To prevent

 

overheating, the openings should not be blocked or covered. Do not place the LCD

 

monitor on a bed, sofa, blanket or other soft surfaces; or else the soft objects will

 

block the openings of the LCD monitors.

 

If you place the LCD Monitor on a bookshelf or other airtight spaces, it’s essential to

 

leave a space of 4”(10cm) distance between the Monitor and the hard surface.

Clean screen

Ensure the area around the LCD monitor is clean and free of moisture. Please refer to

 

[Maintenance] chapter for normal maintenance practice.

 

3

 

English

Image 3
Contents Contents Plug & play Contents FeaturesPower saver ProductSafety ElectricalCommon SET UP Your LCD Monitor InstallationScreen Adjustments Keypad Button Definition OSD ControlPerforming an adjustment Select the language you want Adjustment of ScreenTrouble Shooting Maintenance