Connecting the Devices, Switching the Power

Connecting the Devices

Caution: Make sure that the computer and the monitor are both disconnected from the power supply.

	AC/DC Adapter	Connect the plug of the AC/DC adapter to the (DC IN ) socket of the
	With power cord	monitor , then be insert the power cord into the adapter and a properly
		grounded electric socket.
	VGA Cable	Connect the signal cable to the VGA input socket (VGA IN) of the
		monitor , and connect the signal cable to the VGA output socket of the
		graphics card on the computer. Then tighten the thumbscrews on the
		connector.
	Audio Cable	Connect the audio input socket (AUDIO IN) of the LCD monitor and
		the computer by means of the audio cable.

WARNING: The D-Sub 15 pin plug of the VGA cable is trapezoid in shape. Make sure the shape of the plug matches the shape of the socket it is inserted into, and that none of the pins are bent or otherwise damaged.

Switching the Power

First, switch the power on to the monitor, then switch the power on to the computer. When you see the LED on the power button go blue, this indicates the computer is ready for use. Allow about 10 seconds for the video signal to appear. If you do not see the blue light LED on the power button or a video signal, check the connections.