Acer AL1951 Plug and Play, Plug & Play DDC2B Feature, Using the Right Power Cord

Page 13

PLUG AND PLAY

Plug & Play DDC2B Feature

This monitor is equipped with VESA DDC2B capabilities according to the VESA DDC STANDARD. It allows the monitor to inform the host system of its identity and, depending on the level of DDC used, communicate additional information about its display capabilities.

The DDC2B is a bidirectional data hannel based on the I2C protocol. The host can request EDID information over the DDC2B channel.

THIS MONITOR WILL APPEAR TO BE NON-FUNCTIONAL IF THERE IS NO VIDEO INPUT SIGNAL. IN ORDER FOR THIS MONITOR TO OPERATE PROPERLY, THERE MUST BE A VIDEO INPUT SIGNAL.

This monitor meets the Green monitor standards as set by the Video Electronics Standards Association (VESA) and/or the United States Environmental Protection Agency (EPA) and The Swedish Confederation Employees (NUTEK). This feature is designed to conserve electrical energy by reducing power consumption when there is no video-input signal present. When there is no video input signal this monitor, following a time-out period, will automatically switch to an OFF mode. This reduces the monitor's internal power supply consumption. After the video input signal is restored, full power is restored and the display is automatically redrawn. The appearance is similar to a "Screen Saver" feature except the display is completely off. The display is restored by pressing a key on the keyboard, or clicking the mouse.

USING THE RIGHT POWER CORD :

The accessory power cord for the Northern American region is the wallet plug with NEMA 5-15 style and is UL listed and CSA labeled. The voltage rating for the power cord shall be 125 volts AC.

Supplied with units intended for connection to power outlet of personal computer: Please use a cord set consisting of a minimum No. 18 AWG, type SJT or SVT three conductors flexible cord. One end terminates with a grounding type attachment plug, rated 10A, 250V, CEE-22 male configuration. The other end terminates with a molded-on type connector body, rated 10A, 250V, having standard CEE-22 female configuration.

Please note that power supply cord needs to use VDE 0602, 0625, 0821 approval power cord in European counties.

12

Image 13
Contents Table of Contents FCC Class B Radio Frequency Interference Statement Precautions Checking the Contents of the Package Before YOU Operate the Monitor FeaturesSpecial Notes on LCD Monitors Power Source PowercordControls and Connectors Cable Connections Adjusting the Viewing Angle Operating Instructions General InstructionsExternal Controls MENU/ENTERMenu / Enter Front Panel ControlHOW to Adjust a Setting Main Sub Sub Menu Description Menu Icon Adjusting the PictureOSD 简体中文 日本語Using the Right Power Cord Plug & Play DDC2B FeaturePlug and Play Blue Technical Support FAQPage Cable not Connected Error Message & Possible SolutionInput not Support Vesa DDC2BTM Appendix SpecificationsCUL, FCC, VCCI, CCC, MPR II, CE MenuVGA Video Mode Resolution Horizontal VerticalSvga VesaPIN no Description Connector PIN AssignmentDual-Input Model Tmds