Acer AL1951 Error Message & Possible Solution, Cable not Connected, Input not Support

Page 16

ERROR MESSAGE & POSSIBLE SOLUTION

CABLE NOT CONNECTED :

1.Check that the signal-cable is properly connected , If the connector is loose, tighten the connector’s screws.

2.Check the signal -cable connection pins for damage.

INPUT NOT SUPPORT :

Your computer has been set to unsuitable display mode ,set the computer to display mode given in the following table(See page 18).

15

Image 16

Contents Table of Contents FCC Class B Radio Frequency Interference Statement Precautions Checking the Contents of the Package Before YOU Operate the Monitor FeaturesSpecial Notes on LCD Monitors Powercord Power SourceControls and Connectors Cable Connections Adjusting the Viewing Angle General Instructions Operating InstructionsExternal Controls MENU/ENTERFront Panel Control Menu / EnterHOW to Adjust a Setting Adjusting the Picture Main Sub Sub Menu Description Menu Icon简体中文日本語 OSDUsing the Right Power Cord Plug & Play DDC2B FeaturePlug and Play Technical Support FAQ BluePage Cable not Connected Error Message & Possible SolutionInput not Support Appendix Specifications Vesa DDC2BTMMenu CUL, FCC, VCCI, CCC, MPR II, CEVideo Mode Resolution Horizontal Vertical VGASvga VesaConnector PIN Assignment PIN no DescriptionDual-Input Model Tmds