Acer AL1951 installation instructions Controls and Connectors Cable Connections

Page 6

CONTROLS AND CONNECTORS

CABLE CONNECTIONS

Turn off your computer before performing the procedure below.

1.Connect the power adapter dc cable to the DC-In port on the back of the monitor.

2.Connect one end of the 15-pin D-Sub cable to the back of the monitor and connect the other end to the computer’s D-Sub port.

3.(only Dual-Input Model)Connect one end of the 24-pin DVI cable to the back of the monitor and connect the other end to the computer’s DVI port.

4.Connect the audio cable between the monitor's audio input and the PC's audio output (green port).

5.Plug the power cable of your monitor into a nearby outlet. Plug the other end of the power cord into the power adapter.

6.Turn on your monitor and computer.

	Figure 1	Connecting Cables

1.	D-SUB Cable		4.	External Adapter
2.	DC-Jack Power Cable		5.	DVI Cable
3.	AC Power Cord		6.	Audio cable

5

Image 6

Contents Table of Contents FCC Class B Radio Frequency Interference Statement Precautions Before YOU Operate the Monitor Features Checking the Contents of the PackageSpecial Notes on LCD Monitors Powercord Power SourceControls and Connectors Cable Connections Adjusting the Viewing Angle External Controls General InstructionsOperating Instructions MENU/ENTERFront Panel Control Menu / EnterHOW to Adjust a Setting Adjusting the Picture Main Sub Sub Menu Description Menu Icon简体中文日本語 OSDPlug & Play DDC2B Feature Using the Right Power CordPlug and Play Technical Support FAQ BluePage Error Message & Possible Solution Cable not ConnectedInput not Support Appendix Specifications Vesa DDC2BTMMenu CUL, FCC, VCCI, CCC, MPR II, CESvga Video Mode Resolution Horizontal VerticalVGA VesaDual-Input Model Connector PIN AssignmentPIN no Description Tmds