Acer Computer Monitor installation instructions Shut-down mode

Page 15

Screen image is not centered or sized

*Adjust pixel frequency (CLOCK) and

properly.

FOCUS or press hot-key (AUTO)

Picture has color defects

*Adjust RGB color or select color

(white does not look white)

temperature

 

Horizontal or vertical disturbances on *Use win 95/98

shut-down mode

the screen

Adjust CLOCK

and FOCUS or

perform hot- key (AUTO-key).

CLOCK (pixel frequency) controls the number of pixels scanned by one horizontal sweep. If the frequency is not correct, the screen shows vertical stripes and the picture has not correct width.

FOCUS adjusts the phase of the pixel clock signal. With a wrong phase adjustment the picture has horizontal disturbances in light picture.

For FOCUS and CLOCK adjustment use “dot-pattern” or win 95/98 shut-down mode pattern.

14

Image 15
Contents Table of Contents FCC Class B Radio Frequency Interference Statement Precautions Before YOU Operate the Monitor Features Checking the Contents of the PackageSpecial Notes on LCD Monitors Swivel Base Installation InstructionsPowercord Power SourceConnecting Cables Power Cable Signal Cable Controls and Connectors Cable ConnectionsAdjusting the Viewing Angle General Instructions Operating InstructionsExternal Controls Front Panel Control Menu / EnterHOW to Adjust a Setting Main Sub Sub Menu Description Menu Icon Adjusting the PictureOSD Plug & Play DDC2B Feature Using the Right Power CordPlug and Play Blue Technical Support FAQShut-down mode Input not Support Error Message & Possible Solution Cable not ConnectedAppendix Specifications DDC/CI ON/OFF Preset Display Modes PIN no Description Connector PIN Assignment