BOXLIGHT CINEMA 20HD Turning on / OFF Projector, Turning on Projector, Turning OFF Projector

Page 19

BEFORE OPERATION

TURNING ON / OFF PROJECTOR

TURNING ON PROJECTOR

1

Complete peripheral connections (with Computer, VCR, etc.)

before turning on projector. (Refer to "CONNECTING TO

 

PROJECTOR" on pages 11~13 for connecting that equipment.)

2

Connect the projector's AC Power Cord into an AC outlet. LAMP

Indicator lights RED, and READY Indicator lights GREEN.

 

NOTE : When “On start” function is ON, this projector is turned

 

on automatically by connecting AC Power Cord to an

 

AC outlet. (Refer to pages 37, 38.)

3

Press POWER ON-OFF button on Top Control or on Remote

Control Unit to ON. LAMP Indicator dims, and Cooling Fans

start to operate. Preparation Display appears on a screen and count-down starts. Signal from PC or Video source appears after 30 seconds.

Current Input position is also displayed on screen for 5 seconds.

Input position

Input 1

30

Preparation Display disappears after 30 seconds.

TURNING OFF PROJECTOR

1

Press POWER ON-OFF button on Top Control or on Remote

Control Unit, and a message "Power off?" appears on a screen.

2

Press POWER ON-OFF button again to turn off projector. LAMP

Indicator lights bright and READY Indicator turns off. After

 

projector is turned off, Cooling Fans operate (for 90 seconds).

 

During this "Cooling Down" period, this appliance cannot be

 

turned on.

3

When projector has cooled down, READY Indicator lights

GREEN again and you can turn projector on. After cooling down

completely, disconnect AC Power Cord.

TO MAINTAIN LIFE OF LAMP, ONCE YOU TURN PROJECTOR ON, WAIT AT LEAST 5 MINUTES BEFORE TURNING IT OFF.

Power off?

Message disappears after 4 seconds.

When “Power Management” function is ON, projector detects signal interruption and turns off Projection Lamp automatically. Refer to “Power Management” on page 37.

When WARNING TEMP. Indicator flashes red, projector is automatically turned off. Wait at least 5 minutes before turning on projector again.

When WARNING TEMP. Indicator continues to flash, follow procedures below:

1.Press POWER ON-OFF button to turn the projector off and disconnect AC Power Cord from an AC outlet.

2.Check Air Filters for dust accumulation.

3.Clean Air Filters. (See "AIR FILTER CARE AND CLEANING" section on page 39.)

4.Turn the projector on again.

If WARNING TEMP. Indicator should still continue to flash, call Boxlight Corporation at 1-800-762-5757 or 360-779-7901.

19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Cinema 20HD Risk of Electric Shock Do not Open To the OwnerVoor de klanten in Nederland Safety InstructionsFederal Communication Commission Notice CompliancesTable of Contents Compact Design Features and DesignCarrying Handle Adjustable Feet Feet Lock LatchesPreparation Name of Each Part of ProjectorConnecting AC Power Cord SETTING-UP ProjectorFor U.S.A. and Canada For Continental Europe Preparation Positioning Projector Lens Shift AdjustmentMoving Projector Preparation Adjustable FeetTerminals of Projector Connecting ProjectorConnecting Projector Connecting to ComputerTerminals Projector Audio Video Connecting to Video EquipmentPoint Volume + Buttons Select Button Operation of Remote ControlBefore Operation No Show Button Wired Remote JackKeystone Button Zoom ButtonTOP Controls and Indicators Operating ON-SCREEN Menu HOW to Operate ON-SCREEN MenuFlow of ON-SCREEN Menu Operation Before Operation Menu BAR Turning on Projector Turning on / OFF ProjectorTurning OFF Projector Basic Operation Adjusting ScreenDirect Operation Sound AdjustmentBasic Operation Picture Freeze Function No Show FunctionSelecting Input Source When Select Input 1 Computer Input TerminalsWhen Select Input 2 5 BNC Input Jacks Computer InputAuto PC AdjustmentAuto PC Adjustment Computer Input Automatic MULTI-SCAN SystemComputer Input Manual PC Adjustment Full screen Computer InputDisplay area Display area H1024 x 48.363 60.004 Computer Input Compatible Computer SpecificationsResolution 640 x 31.469 59.940Image 1~4 Picture Image AdjustmentsImage Level Select Direct Image Level Select MenuImage Adjust Menu Computer Input Image Level AdjustmentVideo Input Screen Menu Picture Screen AdjustmentPicture Screen Select Direct Picture Screen Select MenuVideo Input When Select Input 3 AV TerminalsVideo PAL / Secam / Ntsc / NTSC4.43 / PAL-M / PAL-N Component Video Signal FormatSelecting Video System Video Jack or S-VIDEO JackCinema Color Video Input Image Level AdjustmentTint Noise reduction SharpnessProgressive scan Wide zoom ZoomSetting Menu SettingSetting Menu To change code of Projector To change code of Remote Control UnitAppendix MaintenanceAIR Filter Care and Cleaning Cleaning Projection LensAppendix Lamp Replace Order Replacement LampPOA-LMP38 Appendix Lamp Replace Counter Lamp Handling PrecautionsTroubleshooting Remote Control Unit ServiceDoes not work Technical Specifications Computer INPUT-1 Terminal Analog Appendix Configurations of TerminalsPage Page Limitation of Liability Limited WarrantyWarranty Limitation and Exclusion Disclaimer of Unstated Warranties

CINEMA 20HD specifications

Introducing the BOXLIGHT CINEMA 20HD, a cutting-edge projector designed to transform your home entertainment experience. With advanced technologies and user-friendly features, this projector brings your favorite movies, games, and presentations to life with stunning clarity and vibrant colors.

One of the standout features of the CINEMA 20HD is its impressive resolution. Offering full HD 1080p, this projector ensures that every detail of your content is displayed with precision. Whether you're watching a blockbuster film or showcasing a presentation, the sharpness and accuracy of the image will captivate any audience. The projector boasts a brightness of 3500 lumens, making it suitable for various lighting conditions. This means you can enjoy your viewing experience even in rooms with ambient light without compromising picture quality.

Another significant characteristic of the BOXLIGHT CINEMA 20HD is its versatility in connectivity. It comes equipped with multiple HDMI ports, USB inputs, and even wireless capabilities, allowing you to connect a variety of devices effortlessly. Whether you want to stream content from a smartphone, laptop, or other devices, the CINEMA 20HD makes it simple to switch between sources.

The projector also features built-in speakers that deliver quality sound, enhancing your overall viewing experience. For those who crave an immersive audio experience, the option to connect external sound systems is available, further elevating your cinematic adventure.

In terms of design, the BOXLIGHT CINEMA 20HD is sleek and portable, making it easy to move from one room to another or take along for outdoor events. The lightweight body does not sacrifice durability, ensuring that you can enjoy its features for years to come.

Additionally, the projector is designed with user convenience in mind. Easy setup and a compatible remote control allow for a hassle-free operation. The adjustments for focus and zoom are straightforward, so you can quickly achieve the perfect image size and clarity.

In conclusion, the BOXLIGHT CINEMA 20HD embodies a blend of cutting-edge technology, impressive features, and user-friendly design, making it an ideal choice for anyone looking to enhance their home entertainment setup. Whether for movies, gaming, or presentations, it promises to deliver an extraordinary visual experience.
Top Page Image Contents