BOXLIGHT CINEMA 20HD manual Basic Operation, Adjusting Screen

BASIC OPERATION

ADJUSTING SCREEN

ZOOM ADJUSTMENT

1	Press ZOOM button on Top Control or ZOOM ▲ /▼ button on
	Remote Control Unit. Message “Zoom” is displayed.
2	Press ZOOM ▲ button or POINT UP button to make image
	larger, and press ZOOM ▼ button or POINT DOWN button to

make image smaller.

Zoom

Message disappears after 4 seconds.

FOCUS ADJUSTMENT

1	Press FOCUS button on Top Control or FOCUS ▲/▼ button on
	Remote Control Unit. Message “Focus” is displayed.
2	Adjust focus of image by pressing FOCUS ▲ /▼ button or
	POINT UP/DOWN button(s) .

NOTE;

Focus adjustment may not function properly if the image is corrected by KEYSTONE adjustment.

Focus

Message disappears after 4 seconds.

	LENS SHIFT ADJUSTMENT
1	Press LENS SHIFT button on Top Control or on Remote Control
	Unit. Message “Lens shift” is displayed.
2		�
	Press POINT UP button to move image up, press POINT DOWN	Lens shift
	button to move image down.
		�

�

KEYSTONE ADJUSTMENT

If the projected picture has keystone distortion, correct the image with KEYSTONE adjustment.

1	Press KEYSTONE button on Remote Control Unit or select
	Keystone on SETTING menu. (Refer to page 37.) Keystone

dialog box appears.

2 Correct keystone distortion by pressing POINT UP/DOWN/LEFT/RIGHT button(s). Press POINT UP button to reduce the upper part of the image, and press POINT DOWN button to reduce the lower part. Press POINT LEFT button to reduce the left part, and press POINT RIGHT button to reduce the right part.

•Arrows are white in no correction.

•Arrow(s) of direction being corrected turn(s) red.

•Arrow(s) disappear(s) at the maximum correction.

•If you press the KEYSTONE button on the remote control unit once more while the keystone dialog box is being displayed, the keystone adjustment will be canceled.

Reduce the upper width	Reduce the lower width	Reduce the left part with
with POINT UP button.	with POINT DOWN button.	POINT LEFT button.

Reduce the right part with POINT RIGHT button.

20