BOXLIGHT CINEMA 20HD manual Lamp Handling Precautions, Appendix Lamp Replace Counter

Page 41

APPENDIX

LAMP REPLACE COUNTER

Be sure to reset Lamp Replace Counter after the Lamp Assembly is replaced. When Lamp Replace Counter is reset, LAMP REPLACE Indicator stops lighting.

1

Turn projector on, press MENU button and ON-SCREEN

 

MENU will appear. Press POINT LEFT/RIGHT button(s) to

 

move the red frame pointer to SETTING Menu icon (refer to

 

page 38).

2

Press POINT DOWN button to move the red frame pointer to

 

“Lamp counter reset” and then press SELECT button.

 

Message "Lamp replace counter reset?" is displayed. Move

 

pointer to [Yes] and then press SELECT button.

3

Another confirmation dialog box appears and select [Yes] to

reset Lamp Replace Counter.

Lamp

counter reset

On

Code 1

Move pointer to Lamp counter reset and then press SELECT button. Message “Lamp replace counter reset?” is displayed.

NOTE : Do not reset the Lamp Replace Counter until after the Projection Lamp is replaced.

LAMP HANDLING PRECAUTIONS

This projector uses a high-pressure lamp which must be handled carefully and properly. Improper handling may result in accidents, injury, or create a fire hazard.

●Lamp lifetime may differ from lamp to lamp and according to the environment of use. There is no guarantee of the same lifetime for each lamp. Some lamps may fail or terminate their lifetime in a shorter period of time than other similar lamps.

●If the projector indicates that the lamp should be replaced, i.e., if the LAMP REPLACE INDICATOR lights up, replace the lamp with a new one IMMEDIATELY after the projector has cooled down.

( Follow carefully the instructions in the LAMP REPLACEMENT section of this manual. ) Continuous use of the lamp with the LAMP REPLACE INDICATOR lighted may increase the risk of lamp explosion.

●A Lamp may explode as a result of vibration, shock or degradation as a result of hours of use as its lifetime draws to an end. Risk of explosion may differ according to the environment or conditions in which the projector and lamp are being used.

IF A LAMP EXPLODES, THE FOLLOWING SAFETY PRECAUTIONS SHOULD BE TAKEN.

If a lamp explodes, disconnect the projector’s AC plug from the AC outlet immediately. Contact an authorized service station for a checkup of the unit and replacement of the lamp. Additionally, check carefully to ensure that there are no broken shards or pieces of glass around the projector or coming out from the cooling air circulation holes. Any broken shards found should be cleaned up carefully. No one should check the inside of the projector except those who are authorized trained technicians and who are familiar with projector service. Inappropriate attempts to service the unit by anyone, especially those who are not appropriately trained to do so, may result in an accident or injury caused by pieces of broken glass.

41

Page 40 Page 42
Image 41
Page 40 Page 42
Contents Cinema 20HD Risk of Electric Shock Do not Open To the OwnerVoor de klanten in Nederland Safety InstructionsFederal Communication Commission Notice CompliancesTable of Contents Compact Design Features and DesignPreparation Adjustable Feet Feet Lock LatchesName of Each Part of Projector Carrying HandleFor U.S.A. and Canada For Continental Europe SETTING-UP ProjectorConnecting AC Power Cord Preparation Positioning Projector Lens Shift AdjustmentMoving Projector Preparation Adjustable FeetTerminals of Projector Connecting ProjectorTerminals Projector Connecting to ComputerConnecting Projector Audio Video Connecting to Video EquipmentBefore Operation Operation of Remote ControlPoint Volume + Buttons Select Button Keystone Button Wired Remote JackZoom Button No Show ButtonTOP Controls and Indicators Flow of ON-SCREEN Menu Operation HOW to Operate ON-SCREEN MenuOperating ON-SCREEN Menu Before Operation Menu BAR Turning OFF Projector Turning on / OFF ProjectorTurning on Projector Basic Operation Adjusting ScreenBasic Operation Picture Freeze Function Sound AdjustmentNo Show Function Direct OperationWhen Select Input 2 5 BNC Input Jacks When Select Input 1 Computer Input TerminalsComputer Input Selecting Input SourceAuto PC Adjustment PC AdjustmentComputer Input Automatic MULTI-SCAN System AutoComputer Input Manual PC Adjustment Display area Computer InputDisplay area H Full screenResolution Computer Input Compatible Computer Specifications640 x 31.469 59.940 1024 x 48.363 60.004Image Level Select Direct Picture Image AdjustmentsImage Level Select Menu Image 1~4Image Adjust Menu Computer Input Image Level AdjustmentVideo Input Picture Screen Select Direct Picture Screen AdjustmentPicture Screen Select Menu Screen MenuVideo When Select Input 3 AV TerminalsVideo Input Selecting Video System Component Video Signal FormatVideo Jack or S-VIDEO Jack PAL / Secam / Ntsc / NTSC4.43 / PAL-M / PAL-NCinema Tint Video Input Image Level AdjustmentColor Progressive scan SharpnessNoise reduction Wide zoom ZoomSetting Menu SettingSetting Menu To change code of Projector To change code of Remote Control UnitAIR Filter Care and Cleaning MaintenanceCleaning Projection Lens AppendixPOA-LMP38 Order Replacement LampAppendix Lamp Replace Appendix Lamp Replace Counter Lamp Handling PrecautionsTroubleshooting Does not work ServiceRemote Control Unit Technical Specifications Computer INPUT-1 Terminal Analog Appendix Configurations of TerminalsPage Page Warranty Limitation and Exclusion Limited WarrantyDisclaimer of Unstated Warranties Limitation of Liability

CINEMA 20HD specifications

Introducing the BOXLIGHT CINEMA 20HD, a cutting-edge projector designed to transform your home entertainment experience. With advanced technologies and user-friendly features, this projector brings your favorite movies, games, and presentations to life with stunning clarity and vibrant colors.

One of the standout features of the CINEMA 20HD is its impressive resolution. Offering full HD 1080p, this projector ensures that every detail of your content is displayed with precision. Whether you're watching a blockbuster film or showcasing a presentation, the sharpness and accuracy of the image will captivate any audience. The projector boasts a brightness of 3500 lumens, making it suitable for various lighting conditions. This means you can enjoy your viewing experience even in rooms with ambient light without compromising picture quality.

Another significant characteristic of the BOXLIGHT CINEMA 20HD is its versatility in connectivity. It comes equipped with multiple HDMI ports, USB inputs, and even wireless capabilities, allowing you to connect a variety of devices effortlessly. Whether you want to stream content from a smartphone, laptop, or other devices, the CINEMA 20HD makes it simple to switch between sources.

The projector also features built-in speakers that deliver quality sound, enhancing your overall viewing experience. For those who crave an immersive audio experience, the option to connect external sound systems is available, further elevating your cinematic adventure.

In terms of design, the BOXLIGHT CINEMA 20HD is sleek and portable, making it easy to move from one room to another or take along for outdoor events. The lightweight body does not sacrifice durability, ensuring that you can enjoy its features for years to come.

Additionally, the projector is designed with user convenience in mind. Easy setup and a compatible remote control allow for a hassle-free operation. The adjustments for focus and zoom are straightforward, so you can quickly achieve the perfect image size and clarity.

In conclusion, the BOXLIGHT CINEMA 20HD embodies a blend of cutting-edge technology, impressive features, and user-friendly design, making it an ideal choice for anyone looking to enhance their home entertainment setup. Whether for movies, gaming, or presentations, it promises to deliver an extraordinary visual experience.
Top Page Image Contents