BASIC OPERATION
TURNING ON / OFF THE PROJECTOR
TURNING ON THE PROJECTOR
1 | Complete the peripheral connections (with Computer, VCR, |
etc.) before turning on the projector. (Refer to "CONNECTING | |
| TO THE PROJECTOR" on Pages 10~13 for connecting that |
| equipment.) |
2 | Connect the projector's AC power cord into a wall outlet. The |
LAMP indicator lights RED, and the READY indicator lights | |
| GREEN. |
3 | Press the power |
on the Top Control to ON. The LAMP POWER indicator dims, |
and the Cooling Fans start to operate. The Preparation Display appears on the screen and the
30
The Preparation Display disappears after 30 seconds.
| TURNING OFF THE PROJECTOR |
1 | Press the power |
on the Top Control, and the message "Power off?" appears on | |
| the screen. |
2 | Press the power |
The LAMP indicator lights bright and the READY indicator turns | |
| off. The Cooling Fans operate for 90 seconds after the |
| projector is turned off. (During this "Cooling Down" period, this |
| appliance cannot be turned on.) |
3 | When cooling the projector has finished, the READY indicator |
turns to green again and you can turn the projector on. After |
cooling down completely, disconnect the AC power cord.
Power off?
The message disappears after 4 seconds.
TO MAINTAIN THE LIFE OF THE LAMP, ONCE YOU TURN IT ON, WAIT AT LEAST 5 MINUTES BEFORE TURNING IT OFF.
When the TEMPERATURE WARNING indicator flashes red, the projector is automatically turned off. Wait at least 5 minutes before turning the projector on again.
If the TEMPERATURE WARNING indicator continues to flash, follow procedures below:
1.Disconnect the AC power cord from the AC outlet.
2.Check the air filters for dust accumulation.
3.Clean the Air Filter. (See "AIR FILTER CARE AND CLEANING" section on page 33.)
4.Press the power
If the TEMPERATURE WARNING indicator still continues to flash, call Boxlight at
NOTE: The Cooling Fan may work for cooling while the projector is turned off. When the Cooling Fan is working, TEMPERATURE WARNING INDICATOR flashes red.
19