BOXLIGHT CP-11t manual Preparation Connecting the AC Power Cord, Ventilation

Page 8

PREPARATION

CONNECTING THE AC POWER CORD

This projector uses nominal input voltages of 100-120 V AC or 200-240 V AC. The projector automatically selects the correct input voltage. It is designed to work with single-phase power systems having a grounded neutral conductor. To reduce the risk of electrical shock, do not plug into any other type of power system.

Consult your authorized dealer or service station if you are not sure of the type of power supply being in use. Connect the projector with the peripheral equipment before turning the projector on. (Refer to pages 10 ~ 13 for connection.)

CAUTION

For safety, unplug the AC Power Cord when the appliance is not in use.

When this projector is connected to the outlet with the AC Power Cord, the appliance is in Stand-by Mode and consumes some electric power.

Connect the AC power supply cord (supplied) to the projector.

The socket-outlet must be near this equipment and must be easily accessible.

Projector side (Female)		AC outlet side (Male)

VENTILATION

This projector is equipped with cooling fans for protection from overheating. ensure proper ventilation and avoid a possible risk of fire and malfunction.

●Do not cover the vent slot.

●Keep the rear grill at least 3’(1m) away from any object.

●Keep sides clear of any obstructions. Obstructions may block cooling air.

Pay attention to the following to

EXHAUST VENT

(REAR SIDE)

AIR INTAKE VENTS (BOTH SIDES)

8

Image 8

Contents Boxlight CP-11t Safety Precautions To the OwnerImportant Safety Instructions GroundTable of Contents Features and Design CompatibilityPreparation Name of Each Part of the ProjectorPositioning the Projector SETTING-UP the ProjectorAdjustable Feet Preparation Connecting the AC Power Cord VentilationPreparation Moving the Projector Connecting the Projector Terminals of the ProjectorConnecting to the Video Equipment Connecting the ProjectorUsed cables for connection Video CableMAC Adapter Monitor Cable Connecting to the ComputerVGA Cable Control Cable for PS/2 Port Computer Monitor Control Audio OUT Port MAC Adapter Not suppliedOperation of the Remote Control Before OperationRemote Control Batteries Installation TOP Controls and Indicators Lamp IndicatorFlow of ON-SCREEN Menu HOW to Operate ON-SCREEN MenuOperating ON-SCREEN Menu Setting Menu Before Operation Menu BARBasic Operation Turning on / OFF the ProjectorTurning on the Projector Turning OFF the ProjectorAdjusting the Image Zoom AdjustmentFocus Adjustment Keystone AdjustmentSound Adjustment Sound Volume AdjustmentSound Mute Adjustment Basic Operation No Show FunctionSelecting Computer System Computer ModeSelecting Computer Mode Computer Mode Compatible Computer Specifications FreqKHz MAC LC13PC Adjustment AdjustTotal lines Total dotsHorizontal / Vertical ClampNormal Function Fine syncWhite balance Red / Green / Blue ContrastPicture Position Adjustment Computer Mode Auto Image FunctionAuto Image PositionPicture Screen Adjustment Expand functionCompress function Panning functionVideo Mode Selecting Video ModeSelecting Color System AutoAdjusting the Picture Image ColorTint SharpnessSelecting Language SettingSetting Menu Operating Wireless Mouse InstallationOperating Wireless Mouse AppendixMaintenance Temperature Warning IndicatorAIR Filter Care and Cleaning Cleaning the Projection LensLamp Replacement Monitor Timer Appendix Lamp Replacement IndicatorLamp Replacement Troubleshooting Remote Control Unit Wireless MouseDoes not work Function does notTechnical Specifications Limited Warranty