Ask Proxima C180 UG manual Important Operating Considerations for Safety

Page 5

Important Operating Considerations for Safety

Place the projector in a horizontal position no greater than 15 degrees off axis.

Locate the projector in a well-ventilated area without any obstructions to intake or exhaust vents. Do not place the projector on a tablecloth or other soft covering that may block the vents.

Locate the projector at least 4' (1.2 m) away from any heating or cooling vents.

Use only InFocus-approved ceiling mounts.

Use only the power cord provided. A surge-protected power strip is recommended.

Refer to this manual for proper startup and shutdown procedures.

In the unlikely event of the lamp rupturing, discard any edible items placed in the surrounding area and thoroughly clean the area along all sides of the projector. Wash hands after cleaning the area and handling the ruptured lamp. This product has a lamp which contains a very small amount of mercury. Dispose of it as required by local, state or fed- eral ordinances and regulations. For more information see www.eiae.org.

Follow these instructions to help ensure image quality and lamp life over the life of the projector. Failure to follow these instructions may affect the warranty. For complete details of the warranty, see the Warranty section at the end of this user's guide.

Do not place objects or people in the 2 foot (.6m) area along the side of the projector. For ceiling mount applications, this area should be 5 feet (1.5m).

computer 2

 

 

computer 1

R

S-video 1

 

monitor out

network

 

computer in

L

serial control

 

audio in

video 2

 

video in

 

 

2 ft (.6m)

 

 

5 ft (1.5m)

4

Image 5
Contents User’s Guide ÅÉë=áåëíêìÅíáçåëK= Trademarks Declaration of ConformityFCC Warning EN 55022 WarningTable of Contents Important Operating Considerations for Safety Introduction Projector components and featuresIncluded items Online RegistrationWireless Projection Connector PanelConnector panel of C160 Connector panel of C180Optional computer connections Connecting a computerRequired computer connections Connect network cable ? No startup screen? Get help on Displaying a computer imageFirst-time projector use with Windows For Windows 2000, Windows ME, and Windows XP Wizard launches two timesAdjusting the image Optional video connections Connecting a video deviceStandard video connections Displaying a video image Adjust the volume on the keypad or remote LED behavior and meaning Troubleshooting your setupShutting down the projector Computer image projected Only startup screen appearsNo computer image, just the words Signal out of range Computer Page Color Turn off Ceiling in SettingsSystem menuLamp turns on Lamp won’t turn on, LED blinking redStill having problems? Using the keypad buttons Troubleshooting the remote Using the remote controlConnecting external speakers Using the audioTroubleshooting audio Optimizing computer images Presentation featuresCustomizing the projector Optimizing video imagesUsing the menus Picture menu Presets Room Lighting Advanced settings Settings menu Startup Logo Blank Screen Effect Key Picture in Picture Network Language Service menu Network Info Cleaning the lens MaintenanceReplacing the projection lamp Page Using the security lock Cleaning the dust filtersStandard Accessories Ship with the projector Part Number AccessoriesOptional Accessories Part Number AppendixRed LED Behavior Explanation Red LED behavior and projector errorsProjected image size Dhcp NumericsLED XGA Warranty Limitation and Exclusion Limited WarrantyTo Obtain Warranty Service Limited Warranty PeriodTo Be Eligible For Limited Warranty Coverage