Ask Proxima C170 manual Important Operating Considerations for Safety

Page 6

Important Operating Considerations for Safety

Place the projector in a horizontal position no greater than 15 degrees off axis.

Locate the projector in a well-ventilated area without any obstructions to intake or exhaust vents. Do not place the projector on a tablecloth or other soft covering that may block the vents.

Locate the projector at least 4' (1.2 m) away from any heating or cooling vents.

Use only approved ceiling mounts.

Use only the power cord provided. A surge-protected power strip is recommended.

Refer to this manual for proper startup and shutdown procedures.

In the unlikely event of the lamp rupturing, discard any edible items placed in the surrounding area and thoroughly clean the area along all sides of the projector. Wash hands after cleaning the area and handling the ruptured lamp. This product has a lamp which contains a very small amount of mercury. Dispose of it as required by local, state or fed- eral ordinances and regulations. For more information see www.eiae.org.

Follow these instructions to help ensure image quality and lamp life over the life of the projector. Failure to follow these instructions may affect the warranty. For complete details of the warranty, see the Warranty section at the end of this user's guide.

Do not place objects or people in the 2 foot (.6m) area along the side of the projector. For ceiling mount applications, this area should be 5 feet (1.5m).

2 ft (.6m)

5 ft (1.5m)

4

Image 6
Contents User’s Guide Hands after handling ÅÉë=áåëíêìÅíáçåëK= FCC Warning Declaration of ConformityTrademarks EN 55022 WarningTable of Contents Important Operating Considerations for Safety Included items Projector components and featuresIntroduction Online RegistrationConnector Panel Wireless ProjectionConnector panel Connecting a computer Required computer connectionsOptional computer connections Connect monitor cable Displaying a computer image ? No startup screen? Get help onFirst-time projector use with Windows Wizard launches two times For Windows 2000, Windows ME, and Windows XPAdjusting the image Connecting a video device Standard video connectionsOptional video connections Displaying a video image Adjust volume Troubleshooting your setup Shutting down the projectorLED behavior and meaning Page No computer image, just the words Signal out of range Image clear and not cropped Page Page Color Blinks red Still having problems? Lamp must be replaced Lamp turns onUsing the keypad buttons Using the remote control Troubleshooting the remoteUsing the LitePort player Folder View navigation Folder 9 press Next to Access FolderUsing the audio Troubleshooting audioConnecting external speakers Optimizing video images Presentation featuresOptimizing computer images Customizing the projectorUsing the menus Picture menu Presets Advanced settings Settings menu Screen Save System LitePort Startup Logo Effect Key Maintenance Cleaning the lensUsing the security lock Replacing the projection lamp Resetting the lamp timer Cleaning the lamp filter screens Optional Accessories Part Number AccessoriesStandard Accessories Ship with the projector Part Number AppendixRed LED behavior and projector errors Projected image sizeRed LED Behavior Explanation Numerics CablesLED Page XGA If YOU Need Assistance