Adjusting the image
Adjust the height of the projector, if necessary, by pressing the release but- ton to extend the elevator foot.
Rotate the leveling foot (located at the bottom back right corner), if neces- sary.
release button
adjust height
| rotate |
elevator | leveling |
foot | foot |
Position the projector the desired distance from the screen at a 90 degree |
|
angle to the screen. | adjust distance |
See page 44 for a table listing screen sizes and distances. |
|
Adjust the zoom or focus rings by rotating them until the desired image size
and focus are produced. | adjust zoom and focus |
|
zoom
focus
The projector has an Auto Keystone option that is turned on by default. But |
|
|
|
|
|
if the image is not square, adjust the vertical digital keystone by using the | adjust keystone |
|
|
|
|
|
|
|
| ||
buttons on the keypad. Press the upper Keystone button to reduce the |
|
|
|
|
|
upper part of the image, and press the lower Keystone button to reduce the |
|
|
|
|
|
lower part. |
|
|
|
|
|
You can also adjust the keystone via the menus, or turn off Auto Keystone. |
|
|
|
|
|
See page 31. |
|
|
|
|
|
|
|
|
|
|
|
Adjust the Contrast or Brightness in the Picture menu.
See page 30 for help with the menus.
adjust Contrast or Brightness
contrast
brightness
12