Projector Control
1 SETTING UP
To enable serial control do the following:
∙Remove the checkmark from “Serial Mouse” in the Projector’s FEATURE MENU. This changes the Baudrate from 1200 to 9600 and turns off the Serial mouse data.
∙Connect the serial (COM) port from the Host to the RS232 connector on the projector
1.1Rs232 Control Cables
Please order the following parts:
Part Number | Description |
301.102A | Mouse Cable 4 meter |
301.113B | PC Mouse Adapter RS232 Straight |
Table 1
1.2RS232 Settings
If SerialMouse is deselected the setting is:
Parameter | Default setting |
Baudrate | 9600 |
Data bit | 8 |
Parity bit | None |
Stop bit | 1 |
Flow Control | None |
Table 2
If SerialMouse is selected the setting is:
Parameter | Default setting |
Baudrate | 1200 |
Data bit | 8 |
Parity bit | None |
Stop bit | 1 |
Flow Control | None |
Table 3
Þ
If the serial mouse is enabled the projector sends mouse data whenever the user moves the trackball on the Batmouse.
Page 3 | Version 1.0 |